|
[China]
Trade Verify
Address: Qinfeng Road No.555 Huashi Town Jiangyin Jiangsu China (mainland) 214421
Contact name:Chris Gong
Hentec Industry Co.,Ltd |
|
Verified Suppliers
|
|
|
Customeized Aluminum Heatsink Extrusion Profiles / With Cutting , Tapping
Descrition:
Hentec Industry is specialize in develop, manufacture and
marketing of high-performance aluminum Heat sink .We have 15 years export experience !
Item | Environmentally Friendly Circular Aluminum Heatsink Extruded Profile , Anodized |
Characteristics of mechanics | 1, Tensile strength: ≥ 205 N/mm2 |
2, Yield strength: ≥ 110 Mpa | |
3, Hardness(HW): ≥ 8 | |
Appearance | 1, No obvious Crack, Scratch , Peeling, Corrosion and air bubble |
2, Hang mark is accepted at two end of the profiles, but should less than 10mm | |
Application | 1, Architecture: Windows and Doors, Curtain Walls, Shutter, Louver, Barrier, Fence, Ceiling, Handrail, balustrades, showcase, Partition |
2, Industrial: tube, pipe, LED strip, heat-sink, motor housing, fins, tent, solar, Vehicle beam, TV Frame | |
3, Furniture: Chair, Wardrobe, Cabinet, Ladder, Closet, Tile Trim | |
Products Feature | 1, Environmentally Friendly, Elegant appearance |
2, Corrosion-Resistant, Abrasion Resistant, High Weather Resistant | |
3, Air-Proof, Water-Proof, Anti-Aging, Durable, Shining |
Applications:
Aluminum heat sink is widely used on Machines , cars , lighter ...
Specifications:
1. Primary Technical Data
1)Chemical composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
2) Mechanical property
Alloy | Temper | Tensile strength | Yield strength | Elongation |
6063 | T5 | ≥ 160Mpa | ≥ 110Mpa | ≥ 8% |
T6 | ≥ 205Mpa | ≥ 180Mpa | ≥ 8% | |
6061 | T6 | ≥ 265Mpa | ≥ 245Mpa | ≥ 8% |
Competitive Advantage:
We can offer professional Manufacturing and exporting service,
OEM/ODM for Metal & Plastic parts in China. All the parts
manufactured by CNC Lathe & Milling Machine Center. 
