Champagne Aluminium Window Profiles 6000 Series anti Corrosion

Champagne Aluminium Window Profiles 6000 Series anti Corrosion

Aluminium Window Profiles 6000 Series Profile Window Screen Integrated Aluminum Window profile

Profile Specification:

Aluminum Windows Doors:

Thickness
There are 70 series and 90 series of aluminum alloy sliding doors, and 70 series can be used for aluminum alloy sliding doors in residential buildings. Series number refers to the millimeter number of the structural dimension of the door frame thickness. There are four kinds of aluminum alloy sliding windows: 55 series, 60 series, 70 series and 90 series. Series selection should be based on the size of the window opening and the local wind pressure value. Aluminum alloy sliding window used as closed balcony shall not be less than 70 series.

Strength
The tensile strength should be 157 n / mm 2 and the yield strength 108 n / mm 2. When purchasing, the profile can be bent moderately by hand, and it should be restored to its original state after releasing.

Chroma
The color of the same aluminum alloy profile should be consistent. If the color difference is obvious, it is not suitable to purchase.

Planeness
Check the surface of aluminum alloy profile, there should be no depression or bulge.

Gloss
Aluminum alloy doors and windows to avoid the purchase of open surface bubbles (white spots) and ash (black spots), as well as cracks, burrs, peeling and other obvious defects of the profile.

Oxidation Degree
The thickness of oxide film should be 10 microns. When purchasing, you can draw on the profile surface to see whether the oxide film on the surface can be wiped off.

Specifications
1 the opening size of doors and windows shall comply with the provisions of GB / T 5824 "series of opening size of doors and windows in buildings".
2 dimensions and specifications of common window openings
one thousand and two hundred × 1500mm
one thousand and five hundred × 1500mm
one thousand and eight hundred × 1500mm

Aluminum Profiles Features:

Corrosion Resistance
The density of aluminum profile is only 2.7g/cm3, which is about 1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3, respectively). In most environmental conditions, including in air, water (or salt water), petrochemistry and many chemical systems, aluminum can show excellent corrosion resistance.

Conductivity
Aluminum profile is often selected for its excellent conductivity. On the basis of equal weight, the conductivity of aluminum is nearly 1/2 of copper.

Thermal Conductivity
The thermal conductivity of aluminum alloy is about 50-60% of copper, which is beneficial to the manufacture of heat exchanger, evaporator, heating appliance, cooking utensil, cylinder head and radiator of automobile.

Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important feature for the electrical and electronic industries. Aluminum profiles cannot be self ignition, which is important for the application of handling or contacting inflammable and explosive materials.

Processability
The processability of aluminum profile is excellent. In various deformation and casting aluminum alloys, and in the various states after the production of these alloys, the machining characteristics have changed greatly, which requires special machine tools or technologies.

Formability
The allowable deformation is controlled by specific tensile strength, yield strength, ductility and corresponding processing hardening rate.

Recyclability
Aluminum has high recovery, and the characteristics of recycled aluminum are almost the same as that of primary aluminum.

• Dolphin Sliding System.pdf
• Dolphin Screen System.pdf
• Dolphin Regular Profile Catalog.pdf
• Dolphin Minimalist Style Decorative Profiles.pdf
• Dolphin Household Cabinet series.pdf
• Dolphin handrail&fence.pdf
• Dolphin Door Series.pdf
• Dolphin Controversy profile catalog.pdf
• Dolphin Casement System.pdf