|
[China]
Trade Verify
Address: D-705, Dongchuang Science and Technology Park, No.216 Jinfeng Road, Suzhou, Jiangsu, China
Contact name:Tracy
Trumony Aluminum Limited |
|
Verified Suppliers
|
|
|
3003 Brazing Aluminum soaking plate for 5g
| Product Name | 3003 Brazed Aluminum soaking plate for 5g |
| Grade | 3000 series: 3003 4000 series: 4343 |
| Surface | Mill finished |
| Executive Standards | ASTM B209, JIS H4000-2006, GB/T3190-2008, GB/T3880-2006, etc. |
| Length | as customers' requiremnet |
| Width | Customized |
| Thickness | 0.9mm or Customized |
| Packing | Standard export packing |
| Temper | O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321 etc |
| Payment Terms | TT, L/C at sight |
| Application | 1) Heat exchange, Radiator, Condenser, Evaporator,Kitchenware, food and chemical products processing and storage devices |
| 2) Mobile communication base station for 5G | |
| 3) Cans cover, car body panels, steering plates, stiffeners, brackets and other components; | |
| Shipment | By sea/by train/by air plane |
| Port | Shanghai port |
Specification of 3003 4343 Brazing Aluminum soaking sheet for 5g:
1) Alloy : 3003/ 4343
2)Temper:H14, H18, H24 etc
3) Thickness: 0.9mm or customized
4) Width:As customized
5) Length: As customized
6) Protective film can be added
7) Production Line: DC and CC production line
8) Application: Mobile Communication Base Station for 5g
9) Surface: Milling finish
Our advantage of 3003 4343 Brazing Aluminum soaking plate for 5g:
1. Since 2006, we have rich experience in this aluminum soaking
sheet industry in China;
2. Good reputation in aluminum industry;
3. We start our productions from aluminum ingot,so we can control
the quality as well;
4. Design develop ability: can give design suggestion or support
5. Price advantage.
6. Good experience and cooperation with big clients in the world;
7. With Certificate ISO9001-2008
8. Sample order is acceptable
9. High performance cost ratio
10.Fast delivery time and fast resolve problem attitude.
Operation principle
The working principle of the soaking plate is the same as that of the heat pipe, including conduction, evaporation, convection and solidification.The soaking plate is a two-phase fluid device composed of pure water injected into a vessel filled with microstructures.Heat is transferred into the plate by heat conduction from the outer high temperature region. The water near the point heat source will quickly absorb heat and vaporize into steam, taking away a large amount of heat energy.Using the latent heat of steam, when the steam inside the plate diffuses from the high pressure area to the low pressure area (i.e. the low temperature area), when the steam comes into contact with the inner wall of the lower temperature, the steam will quickly condense into liquid and give off heat energy.The condensed water flows back to the heat source by capillary action of the microstructure, completing a heat transfer cycle and forming a two-phase cycle system in which water and water vapor coexist.The gasification of water in the soaking plate continues, and the pressure in the cavity will maintain equilibrium with the change of temperature.The thermal conductivity of water is low at low temperature, but the viscosity of water changes with different temperature, so the soaking plate can also operate at 5℃ or 10℃.Since the liquid backflow is acted by capillary force, the influence of gravity on the plate is small, and the application of the application system design space can be used at any Angle.The soaking plate requires no power supply and no moving components. It is a completely sealed passive device.
