|
[China]
Trade Verify
Address: D-705, Dongchuang Science and Technology Park, No.216 Jinfeng Road, Suzhou, Jiangsu, China
Contact name:Tracy
Trumony Aluminum Limited |
|
Verified Suppliers
|
|
|
The micro Multi Port Extrusion (MPE) is a highly refined quality
product and is charac-terised by the following properties:
-Low weight
-Excellent conductor of heat and electricity
-High corrosion resistance
-High recycling value
-High surface quality
-High pressure resistance.
Our Aluminum Micro Channel Tube can be widely used for heat sink /
transfer.
Like evaporator, air conditioner, condenser, heat exchanger,
freezer, oven gas, boiler and so on.
The material can be 1050/1060/1070/3003/3102 or as customer's
request.
Temper O-H112,H112,F.
We can do many kinds of sizes, such as 4.0x0.5mm,
6.0x1.0mm,7.0x1.0mm,
7.94x1.0mm,8x1.0mm,9.52x1.0mm,10x1.0mm,12.7x1.2mm,15.88x1.2mm,16.0x1.0mm,
9.05x1.5mm.
Aluminium galvanized MPE is the main component part
Of air-conditionings and the parallel flow evaporators and
condensers of other
Refrigeration equipments.
The MPE was equipped in environment-friendly auto air-conditioning
systems
Which use R134A as the refrigerant in European Union and China
successively in
The year of 1996 and 2002. With a development of more than ten
years, it has
Become a mature technology.
Aluminum Temper:
1000 series:
1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series:
2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series:
3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series:
5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
5352,5552,5254,5754,5856,5456,5283
O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,
T8510,T8511,T4511,T52,T5511,T6511,T54,T73
| Mechanical property | ||||
| Alloy Code | Temper | Tensile Strength Rm(Mpa) | Yield Strength(Mpa) | Elongation(%) |
| TR-010,TR-020,TR-030,TR-040TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156Etc. | O | 95-135* | ≥35* | ≥15* |
| H14 | 140-185 | ≥125 | ≥1.5 | |
| H24 | 140-185 | ≥125 | ≥3 | |
| H16 | 185-225 | 160 | ≥1 | |
| H18 | ≥185 | -- | ≥0.5 | |
| TR-166Etc. Tube material | H24 | 185-235 | ≥150 | ≥8 |
| TR-116,TR-316 Etc.tube material | H14 | 140-185 | ≥125 | ≥3 |
| H24 | 140-185 | ≥125 | ≥8 | |
| OD | OD Tolerance | ID Tolerance | Roundness | straightness | Circular run-out |
| φ16-20 | ±0.02 | ±0.02 | 0.01↓ | 0.015↓ | 0.05↓ |
| φ20-30 | ±0.02 | ±0.02 | 0.01↓ | 0.015↓ | 0.05↓ |
| φ30-50 | ±0.05 | ±0.05 | 0.02↓ | 0.020↓ | 0.08↓ |
| φ50-80 | ±0.15 | ±0.10 | 0.05↓ | 0.025↓ | 0.10↓ |
