|
[China]
Trade Verify
Address: D-705, Dongchuang Science and Technology Park, No.216 Jinfeng Road, Suzhou, Jiangsu, China
Contact name:Tracy
Trumony Aluminum Limited |
|
Verified Suppliers
|
|
|
Eorrosion Proof 3003 H*2/H*4/T4/T6 Aluminum Plate Used in Automobile Manufacturing and Rail Transit.
1.Introduction
As aluminum reserves in the crust is very rich, It has more advantages over other metals. Aluminum in the future will still have a wide range of applications, for example, the car manufacturers are currently exploring the use of aluminum instead of steel, and make the car lighter. With the progress of technology, aluminum products not only in the aerospace, transportation, electronic power, construction and other traditional applications but also continue to grow rapidly in the new areas.
3003 aluminum alloy
3003 for AL-Mn alloy, is one of the most widely used aluminium alloy, the strength is not high (slightly higher than that of pure aluminum), can be strengthened by heat treatment, so the use of cold processing methods to improve its mechanical properties in annealing state have high plasticity, in the semi cold hardening plastic is good, when the low plasticity of cold hardening, good corrosion resistance, good weldability, poor machinability.
Thickness:0.8-7.0mm
Width:1000-1350mm
Length:2000-13000mm
2.Metal content
Si: 0.60
Fe: 0.70
Cu: 0.05-0.20
Mn: 1.0-1.5
Zn: 0.10
Other:0.05
Al: Remainder
| Alloy NO. | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | ≥99.5 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | 0.05 | Remainder | |||
| 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | 0.2 | Remainder | |||
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | Remainder | ||
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | Remainder | |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | Remainder |
| alloy Code | temper | Tensile Strength Rm(MPa) | Yield Strength Rp0.2(Mpa) | Extend Ratio A50(%) |
| TR-010,TR-020,TR-030,TR-040,TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156 Etc. | O | 95-135* | ≥35* | ≥15* |
| H14 | 140-185 | ≥125 | ≥1.5 | |
| H24 | 140-185 | ≥125 | ≥3.0 | |
| H16 | 185-225 | ≥160 | ≥1.0 | |
| H18 | ≥185 | - | ≥0.5 | |
| TR-166 Etc.tube material | H24 | 185-235 | ≥150 | ≥8 |
TR-116,TR-316 Etc.tube material | H14 | 140-185 | ≥125 | ≥3 |
| H24 | 140-185 | ≥125 | ≥8 |
3.The flow chart
4.Company
Trumony Aluminum Limited is committed to providing clean aluminum material solution to the market. 'Through the discovery and creation, to bring value to customers' is the company philosophy. A manufacturer of aluminum materials with many years' experience, it was established in 2006. Through years of developing, we have supplied products to many large companies with different series of materials. Now we are widely engaged in transportation, heat exchange, cable, packaging, construction, electronics, environmental protection and other fields, Apart from our current production, we are also actively developing new aluminum materials and searching for customers solutions which is best suited for different industries to meet the precise needs of customers.
If you have the need about slitting, cutting and deep-producing, you can contact us.
Hope we can build the relationship in the future.
Good luck!
