Active Member
|
[China]
Address: WenChen Indstial zone, chiping county, Liaocheng,Shandong province, China
Contact name:Henry
MAXL INTERNATIONAL GROUP CO.,LTD ZHANGJIAGANG CHANGHONGIMP&EXP CO.,LTD |
|
|
Industrial Extruded Aluminum Profile With Thin Wall Mill Finish
Item Name | Aluminium profile |
Material Grade | Alloy 6000 Series |
Temper | T5—T6 |
Technology | Aluminum Extrusion |
Surface treatment | Mill finish, anodizing, powder coated, |
Color | Silvery white, black, golden, champagne, |
Normal Anodizing thickness | 8-12 micro |
Normal Power Coating thickness | 60-100 micro |
Shape | Square, Round, Flat, or according to customers' drawings |
Length | The Standard length of export is 5.8m
, Anodizing 6.5 meters at most, |
Deep processing | cutting, drilling, punching, bending etc |
2D&3D Design | 1: 4 Designers in design and development department |
Engineering& Tooling | 1: 8 Engineers in Mold Shop. |
Quality Control | 1. ISO Approved. |
Packing details | 1. EP Paper inside for each profile separate then craft paper outside 2. EP Paper inside for each profile separate then carton paper then pallet |
Delivery | 7-21days after receiving down payment |
Payment Term | T/T, L/C |
Brief Introduction
Quality is the essence of the the company and creates the future.
It is the most important thing in MAXL. We put the quality as the
emphasis since the very beginning of establishing the factory and
it has penetrated into the market of aluminium profiles industry.
For quality guarantee and cost control, MAXL has introduced
advanced producing and testing equipment successively from Germany,
Japan, and USA. MAXL has built an inspection center which has
first-class level in domestic aluminium industry. We had emphasized
on the introduction of Spectrometer from USA, Ultraviolet
manual weathering instrument from America, Q-FOG spraying tester,
High and low temperature electronic omnipotent tester from Japan,
Microscope from Japan , and so on. Advanced testing equipment has
provided a reassuring guarantee for the testing of performance of
products. In one word quality is the soul of our company.
Packaging & delivery
1.Packaging details: EPE + Bubble film +
Corner protection + paper + plywood +
wood strip jointer
2.Delivery time for samples: about
5 days for sample production after
all material confirmed.
3.Delivery time for mass production: 15
work days.
Chemical Composition
Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti | Impurity | |
Unit | Total | |||||||||
6063 | 02-06 | 0.45-0.9 | <0.35 | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | <0.05 | <0.15 |
6061 | 0.4-0.8 | 0.8-1.2 | <0.7 | 0.15-0.4 | <0.15 | <0.25 | 0.04-0.35 | <0.15 | <0.05 | <0.15 |
6060 | 0.-0.6 | 0.35-0.6 | 0.1-0.3 | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.05 | <0.1 | <0.05 | <0.15 |
6005 | 0.6-0.9 | 0.4-0.6 | 0.35 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.05 | <0.15 |
Our Advantages:
1. Precision machining and cutting:
tolerance can be controlled within
0.2-0.5 mm in length, 0.05mm for holes.
2. All processes is controlled
in the same factory to ensure to the good quality and lead
time.
3. We are skilled in designing and developing special aluminum heat
sink.
4. OEM and ODM service is available.
