|
[China]
Trade Verify
Address: Guobao Mansion 2110, Southwest Crossing of Kaiyuan Avenue and Wangcheng Avenue, Luoyang, China
Contact name:Alex Yang
Luoyang Sanwu Cable Co., Ltd., |
|
Verified Suppliers
|
|
|
DIN48204 Aluminium Conductor Steel Reinforced Lay Stranded
Aluminium Conductor Steel Reinforced is concentrically stranded
conductor with one or more layers of Aluminium wire hard-drawn
1350-H19 on the galvanized steel wire core. The core may be single
wire or stranded depending on the size. Steel wire is available in
Class A or B galvanization as corrosion protection.
ACSR is according to electrical and mechanical strength
requirements of transmission or distribution lines, can provides an
appropriate design combining the quantity of Aluminium and
galvanized steel wires.
| Code | Size (AWG/MCM) | Number of Strands(mm) | Weight(kg/km) | Rated Strength(kg) |
| Rose | 4 | 7*1.96 | 58.3 | 399 |
| Iris | 2 | 7*2.47 | 92.7 | 611 |
| Pansy | 1 | 7*2.78 | 117 | 740 |
| Poppy | 1/0 | 7*3.12 | 147.5 | 897 |
| Aster | 2/0 | 7*3.5 | 186 | 1375 |
ACSR Conductor
ACSR is a composite concentric-lay-stranded conductor. Galvanized steel strand or strands form the central core of the conductor,around which is stranded one or more layers of EC Grade Aluminum wires. The steel core may consist of a single strand or a concentricstranded cable of 7, 19, 37, or more wires. Numerous combinations of aluminum and steel strands and layers are possible. If you haveany suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
Applications
Conductor(AAC and ACSR) have been widely used in power transmission
lines with various voltage levels,because they have such good
characteristics as simple structure,convenient installation and
maintenance,low cost large transmission capacity.And they are also
suitable for laying across rivers valleys and the places where
special geographical features exist.
Service Performance:
(1). The permissible long-time operating temperature for aerial
conductor is 70℃.
(2). Under the circumstance that rare climate is occurring and ice
coverage rate low in heavy ice area, the biggest stress of cable at
the lowest point of the sag should not exceed 60% of the short-time
destructive power.
(3). When connecting conductors, the conductor beside the
connecting tube cant be prominent. Otherwise, the force on the
operating conductors will be unbalanced. After connectors are
install, the connecting tube should be painted by moisture-proof
varnish in order to protect it from corrosion.
(4). Under installation, the arc downing stress of all the
conductors should be the same. With in the permissible distance of
crossing buildings or dropping to the ground, the stress can be
10-15% higher than regular stress.
