Active Member
|
[China]
Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING
Contact name:Masha Cui
Chongqing Dongchong Aluminum Co., Ltd. |
|
|
Multi-Used 0.4-4.0mm Thickness Cutting Discs Aluminum Circle Sheet for Household
Product Description
1000 series aluminum alloy represents 1050, 1060, 1100 series. Of all the series, 1000 series belongs to the series with the highest aluminium content. The purity can reach over 99.00%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in conventional industries. The majority of the market circulation is 1050 and 1060 series. The lowest aluminium content of 1000 series aluminium sheets is determined by the last two Arabic numerals. For example, the last two Arabic numerals of 1050 series are 50. According to the naming principle of international brands, the aluminium content must be above 99.5% before qualified products are obtained. Our country's aluminium alloy technical standard (gB/T3880-2006) also clearly stipulates that the aluminium content of 1050 reaches 99.5%. Similarly, the aluminium content of 1060 series aluminium plates must reach 99.6%
| Alloy | 1050 1060 1070 1100 3003 |
| Temper | H18,H14,H16,O ,H32,H111 |
| Diameter | 20-200MM |
| Thickness | 0.4-4.0MM |
| Usage | Deep drawing cookware, spinning cookware, road sign, Building Material,Insulation,etc. |
1, Aluminum circle Tolerance: thickness tolerance +/-3%, diameter tolerance +/-1%mm
2, Aluminum circle Surfact Quality :Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Dicoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use.
3, Aluminum circle Mechanical Property:
Chemical Composite and Mechanical Property could meet the requirements of GB/T, ASTM, ENAW, JIS Standard
Chemical Composition
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 1060 | 0 | >0. 20 — 0, 30 | 60—100 | 15 | 15 |
| >0.30—0,50 | 18 | ||||
| >0. 50-1. 50 | 23 | ||||
| >1. 5-6.00 | 25 | ||||
| >6. 00 — 80, 00 | 25 | ||||
| H12 H22 | >0.50 —1,50 | 80 — 120 | 60 | 6 | |
| >1. 50 — 6,00 | 12 | ||||
| H14 H24 | >0. 30 — 0, 50 | 95-135 | 70 | 2 | |
| >0.50 — 0. 80 | 2 | ||||
| >0. 80—1. 50 | 4 | ||||
| >1.50 — 3.00 | 6 | ||||
| >3.00 — 6. 00 | 10 | ||||
| H16 H26 | >0.20-0. 30 | 110 — 155 | 75 | 1 | |
| >0. 30 — 0.50 | 2 | ||||
| >0. 50 — 0. 80 | 2 | ||||
| >0.80 〜1.50 | 3 | ||||
| >1. 50 — 4. 00 | 5 | ||||
| H18 | >0. 20 — 0.30 | 125 | 85 | 1 | |
| >0. 30 — 0, 50 | 2 | ||||
| >0.50 — 1.50 | 3 | ||||
| >1,50-3.00 | 4 | ||||
| H112 | >4. 50〜5. D0 | 75 | 10 | ||
| >6. 00 — 12. 50 | 75 | 10 | |||
| >12*50 — 40.00 | 70 | —— | |||
| >40.00-80.00 : | 60 | ||||
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 1O5OA | 0 | >0. 20—0.50 | 60-100 | 15 | |
| >0,50 — 1,50 | 20 | ||||
| >0.8-1.5 | 20 | 25 | |||
| >1.5-6.0 | 28 | ||||
| >6. 00—50, 00 | 30 | ||||
| H12 | >0.20 — 0. 50 | 80-120 | 2 | ||
| >0.50 — 1.50 | 65 | 4 | |||
| >1. 50 — 3.00 | 5 | ||||
| >3.00 — 6.00 | 7 | ||||
| H22 | >0. 20 — 0. 50 | 80 | 4 | ||
| >0. 50—1. 50 | 65 | 5 | |||
| >1. 50 — 3. 00 | 6 | ||||
| >3. 00 — 6. 00 | 11 | ||||
| H14 | >0. 20 — 0.50 | 95-130 | 2 | ||
| >0. 50 — 1. 50 | 75 | 3 | |||
| >1.50 — 3.00 | 4 | ||||
| >3.00 — 6. 00 | 5 | ||||
| H24 | >0. 20—G. 50 | 95 | 3 | ||
| >0. 50—1.50 | 75 | 4 | |||
| >1.50 — 3.00 | 5 | ||||
| >3.00—6. 00 | 8 | ||||
| H16 | >0.20 — 0. 50 | 120-150 | 85 | 1 | |
| >0, 50 — 1.50 | 2 | ||||
| >1. 50 — 4. 00 | 3 | ||||
| H26 | >0.20 — 0. 50 | 120 | 2 | ||
| >0, 50 — 1.50 | 3 | ||||
| >1. 50 — 4. 00 | 85 | 4 | |||
| H18 | >0. 20—0.50 | 130 | 1 | ||
| >0. 50 — 1. 50 | 2 | ||||
| >1. 50 — 3. 00 | 3 | ||||
| H112 | >4. 50— 12. 50 | 85 | 45 | 10 | |
| >12,50—75,00 | 80 | 45 | 10 | ||
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 1100 | 0 | >0. 20-0. 30 | 75 — 105 | 25 | 15 |
| >0.30 — 0.63 | 17 | ||||
| >0. 63-1.2 | 22 | ||||
| >1.2-6.3. | 30 | ||||
| >6.3 — 80.00 | 28 | ||||
| H12 H22 | >0. 20—0,50 | 95—130 | 75 | 3 | |
| >0. 50 — 1. 50 | 5 | ||||
| >1.50 — 6.00 | 8 | ||||
| H14 H24 | >0.20-0.30 | 110 — 145 | 95 | 1 | |
| >0. 30 — 0. 50 | 2 | ||||
| >0.50 — 1,50 | 3 | ||||
| >1.50 — 4.00 | 5 | ||||
| H16 H26 | >0. 20—0.30 | 130-165 | 115 | 1 | |
| >0. 30 — 0.50 | 2 | ||||
| >0.50 — 1,50 | 3 | ||||
| >1.50 — 4.00 | 4 | ||||
| H18 H28 | >0. 20 — 0.32 | 150 | — | 1 | |
| >0.32-0.63 | 2 | ||||
| >0.63-1.2 | 4 | ||||
| >1.2-3.2 | 90 | 50 | 9 | ||
| H112 | >12,50 — 40.00 | 85 | 40 | — | |
| >40.00 — 80.00 | 80 | 30 |
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 3003 | O H111 | >0. 20—0. 50 | 95-135 | 35 | 15 |
| >0. 50 — 1. 50 | 17 | ||||
| >1. 50 — 3. 00 | 20 | ||||
| >3.00 — 6. 00 | 23 | ||||
| >6.0-12.5 | 24 | ||||
| >12.5-50 | |||||
| H12 | >0. 20—0. 50 | 120-160 | 90 | 3 | |
| >0. 50 — 1. 50 | 4 | ||||
| >1.50 — 3.00 | 5 | ||||
| >3. 00 — 6. 00 | 6 | ||||
| H14 | >0. 20 — 0. 50 | 145-195 | 125 | 2 | |
| >0. 5- 50 | 2 | ||||
| >1. 50 — 3. 00 | 3 | ||||
| >3. 00—6.0 | 4 | ||||
| H16 | >0. 20 — 0. 50 | 170-210 | 140 | 2 | |
| >0.50 — 1.50 | 3 | ||||
| >1. 50—4. 00 | 3 | ||||
| H18 | >0. 20 — 0. 50 | 190 | 170 | 1 | |
| >0. 50—1. 50 | 2 | ||||
| >1. 50 — 3. 00 | 2 | ||||
| H22 | >0. 20—0. 50 | 120-160 | 80 | 6 | |
| >0. 50 — 1.50 | 7 | ||||
| >1.50 — 3.00 | 8 | ||||
| >3. 0—6.0 | 9 | ||||
| H24 | >0. 20—0. 50 | 145-195 | 115 | 4 | |
| >0. 50 — 1.50 | 4 | ||||
| >1.50 —3. 00 | 5 | ||||
| H26 | >0. 20 — 0. 50 | 170-210 | 140 | 2 | |
| >0.50—1.50 | 3 | ||||
| >1.50 — 3. 00 | 3 | ||||
| H28 | >0,20 — 0,50 | 190 | 160 | 2 | |
| >0. 50〜L 50 | 2 | ||||
| >1. 50—3. 00 | 3 | ||||
Photo
Company Introduction
Chongqing Dongchong AluminumCo,.Ltd. is a manufacturer of Aluminium products with well-equipped,experienced work team.Our company is equipped with international advanced aluminum production lines. We also own press machine, double-sided milling, cutting machine, recoiler, grinding machine, quenching furnace, tension pre-stretching machine, annealing furnace, smelting furnace machine and so on. We mainly provide aluminum and its alloy sheets, plates, strips, circles, foils, embossed coils, colorful painted aluminum coils, sheet products, etc.With a wide range, good quality, reasonable prices and stylish designs, our products can meet most of all customer needs.Our company established in 2002 and have been in aluminium indurstry for more than 15 years.We have our own brand and customized services are available too.We are an ISO9001:2008 certified company and our QC staff members have ten years' experience in this area. To maintain a strict QC system, we not only utilize precision testing instruments but also continuously train our QA personnel regarding the latest testing principles.We have established long term business relationships with customers in many countries and areas in the world, including the USA, Canada, Brazil, India, Chile, Nigeria, Ghana, Italy, etc. We will continue providing high quality products and better services for our customers, and welcome you to visit our company and establish good business relationships with us.
