Active Member
|
[China]
Address: No.21, Shixin Road, Dongbeitang Street, Xishan District, Wuxi City,Jiangsu province,China
Contact name:Wanda
Jiangsu Xintaiming Technology Co., Ltd. |
|
|
Aluminum Round Bar Aviation Grade 6023 6082 5083 6061 5052 5083 7075 T6 Cutting Customized Size
An aluminium alloy (or aluminum alloy; see spelling differences) is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided
into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought
products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the
low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system
is Al–Si, where the high levels of silicon (4–13%) contribute to give good
casting characteristics. Aluminium alloys are widely used in
engineering structures and components where light weight or
corrosion resistance is required.
1)1000 Series Alloy (Generally called commercial pure
aluminum,Al>99.0%) | |
| Purity | 1050 1050A 1060 1070 1100 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/ |
| H26/H36 H18/H28/H38 H114/H194, etc. | |
| Specification | Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C) |
| Application | Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc. |
| Feature | Lid Shigh conductivity, good corrosion resistant performance, high latent heat |
| of melting, high-reflectance, well welding property, low strength, and not | |
| suitable for heat treatments. | |
| 2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) | |
| Alloy | 3003 3004 3005 3102 3105 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/ |
| H36 H18/H28/H38 H114/H194, etc. | |
| Specification | Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C) |
| Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
| Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistant |
| performance, well welding property, good plasticity, low strength but suitable | |
| for cold working hardening | |
| 3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) | |
| Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
| Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34 |
| H16/H26/H36 H18/H28/H38 H114/H194, etc. | |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile |
| Body Sheets, Automobile Inside Board, The Protective Cover On Engine. | |
| Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength, |
| good corrosion resistant performance, well welding property, well fatigue strength, | |
| and suitable for anodic oxidation. | |
| 4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) | |
| Alloy | 6061 6063 6082 |
| Temper | O F, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components, |
| Transport Ship, Semiconductor Equipments, etc | |
| Feature | Good corrosion resistant performance, well welding property, good oxidability, |
| easy to spray-finishing, well oxidation coloring, good machinability. | |
| Aluminum Grade | ||
| Alloy Series | Typical Alloy | |
| 1000 Series | 1050 1060 1070 1100 | Pure aluminum |
| 2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 | Aluminum copper alloy |
| 3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 | Aluminum manganese alloy |
| 4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A | Aluminum silicon alloy |
| 5000 Series | 5052, 5083, 5754, 5005, 5086,5182 | Aluminum magnesium alloy |
| 6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 | Aluminum magnesium silicon alloy |
| 7000 Series | 7075, 7A04, 7A09, 7A52, 7A05 | Aluminum magnesium silicon alloy |
| 8000 Series | 8006 8011 8079 | Aluminum foil alloy |
Before- Sale service:
1. ISO Verified Outstanding Manufacturer
2. The third party inspection: SGS, BV, CE, COC, AI and other.
3. Flexible Payment: T/T, LC, O/A, CAD, DAP, KUNLUN Bank
4. Sufficient Stock
5. Quick Delivery Time, Long time price validity.
6. Tracking picture of transport: Production, Loading and
reinforcement loading Pictures
7. Rich experience Professioal Sale Team
After- Sale service:
1. Quality Guarantee after Receiving the Goods:
Offer money return or Ship new products for free if any problems
happen
2. Technical Guidance for further Processing
3. VIP Service and Free Order after Accumulated Order Quantity
FAQ
Q1: Are you factory or trading company ?
