Shanghai Tankii Alloy Material Co.,Ltd |
Verified Suppliers
|
|
Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
Cd | Pb | Hg | Cr | ||||||
2~5 | 11~13 | <0.5 | micro | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 0-100ºC |
Resisivity at 20ºC | 0.44±0.04ohm mm2/m |
Density | 8.4 g/cm3 |
Thermal Conductivity | 40 KJ/m·h·ºC |
Temp Coefficient of Resistance at 20 ºC | 0~40α×10-6/ºC |
Melting Point | 1450ºC |
Tensile Strength(Hard) | 585 Mpa(min) |
Tensile Strength,N/mm2 Annealed,Soft | 390-535 |
Elongation | 6~15% |
EMF vs Cu, μV/ºC (0~100ºC) | 2(max) |
Micrographic Structure | austenite |
Magnetic Property | non |
Hardness | 200-260HB |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |
Application of Manganin
Manganin foil and wire is used in the manufacture of resistor,
Particularly ammeter shunt, because of its virtually zero
temperature coefficient of resistance value and long term
stability.
The copper-based low resistance heating alloy is widely used in
low-voltage circuit breaker, thermal overload relay, and other
low-voltage electrical product. It is one of the key materials of
the low-voltage electrical products. The materials produced by our
company have the characteristics of good resistance consistency and
superior stability. We can supply all kinds of round wire, flat and
sheet materials.
Copper nickel alloy series:Constantan CuNi40 (6J40), CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23,CuNi30, CuNi34, CuNi44.
Size dimension range:
Wire: 0.1-10mm
Ribbons: 0.05*0.2-2.0*6.0mm
Strip: 0.05*5.0-5.0*250mm
Main grades and properties
Type | Electrical resistivity (20degreeΩ mm²/m) | temperature coefficient of resistance (10^6/degree) | Dens ity g/mm² | Max. temperature (°c) | Melting point (°c) |
CuNi1 | 0.03 | <1000 | 8.9 | / | 1085 |
CuNi2 | 0.05 | <1200 | 8.9 | 200 | 1090 |
CuNi6 | 0.10 | <600 | 8.9 | 220 | 1095 |
CuNi8 | 0.12 | <570 | 8.9 | 250 | 1097 |
CuNi10 | 0.15 | <500 | 8.9 | 250 | 1100 |
CuNi14 | 0.20 | <380 | 8.9 | 300 | 1115 |
CuNi19 | 0.25 | <250 | 8.9 | 300 | 1135 |
CuNi23 | 0.30 | <160 | 8.9 | 300 | 1150 |
CuNi30 | 0.35 | <100 | 8.9 | 350 | 1170 |
CuNi34 | 0.40 | -0 | 8.9 | 350 | 1180 |
CuNi40 | 0.48 | ±40 | 8.9 | 400 | 1280 |
CuNi44 | 0.49 | <-6 | 8.9 | 400 | 1280 |
Company Profile
Shanghai Tankii Alloy Material Co., Ltd. Focus on the production of
resistance alloy(nichrome Alloy, FeCrAl Alloy, copper nickel alloy,
thermocouple wire, precision alloy and thermal spray alloy in the
form of wire, sheet, tape, strip, rod and plate. We've already got
ISO9001 quality system certificate and approval of ISO14001
environmental protection system. We own a complete set of advanced
production flow of refining, cold reduction, drawing and heat
treating etc. We also proudly have independent R&D capacity.
Shanghai Tankii Alloy Material Co., Ltd has accumulated lots of
experiences over 35 years in this field. During these years, more
than 60 management elites and high science and technology talents
were employed. They participated in every walk of the company life,
which make our company keep blooming and invincible in the
competitive market. Based on the principle of "first quality,
sincere service", our managing ideology is pursuing technology
innovation and creating the top brand in the alloy field. We
persist in Quality - the foundation of the survival. It is our
forever ideology to serve you with full heart and soul. We
committed to provide customers all over the world with
high-quality, competitive products and perfect service.
Our products, such us nichrome alloy, precision alloy, thermocouple
wire, fecral alloy, copper nickel alloy, thermal spray alloy have
been exported to over 60 countries in the world. We are willing to
establish strong and long-time partnership with our customers. Most
complete range of products dedicated to Resistance, Thermocouple
and Furnace manufacturers Quality with end to end production
control Technical support and Customer Service.