|
[China]
Trade Verify
Address: No. 388 Pangu Road, Baoshan district, Shanghai, 201999, China
Contact name:Martin Lee
Shanghai Tankii Alloy Material Co.,Ltd |
|
Verified Suppliers
|
|
|
Shunt Manganin 43 Precision Resistance Wire 6j13 for Shunt Resistor
Shunt Manganin 43(Precision Resistance wire)
(Common Name: Manganin 43,CuMn12Ni4,Manganin )
Shunt Manganin 43 is a copper-manganese-nickel alloy (CuMnNi alloy) for use at room temperature. The alloy is characterized by very low thermal electromotive force (emf) compared to copper.
Shunt Manganin43 widely used for Shunt resistor with the highest requirements, shunt manganin43 has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Normal composition%
| Nickel | 4 | Manganese | 12 |
| Copper | Bal. |
Typical Mechanical properties(1.0mm)
| Yield strength | Tensile Strength | Elongation |
| Mpa | Mpa | % |
| 180 | 390 | 15 |
Typical Physical properties
| Density (g/cm3) | 8.4 |
| Electrical resistivity at 20ºC (Ωmm2/m) | 0.43 |
| Temperature factor of resistivity(20ºC~600ºC)X10-6/ºC | 0~40 |
| Thermal coefficient at 20ºC (WmK) | 22 |
| EMF vs Cu(μV/ºC )(0~100ºC ) | <2 |
| Coefficient of thermal expansion | |
| Temperature | Thermal Expansion x10-6/K |
| 20 ºC- 100ºC | 18 |
| 20 ºC- 400ºC | 19.5 |
| Specific heat capacity | |
| Temperature | 20ºC |
| J/gK | 0.41 |
| Melting point (ºC) | 960 |
| Element working temperature in air (ºC) | 5~45 |
| Magnetic properties | non-magnetic |
Corrosion resistance performance
| Alloys | Working In atmosphere at 20ºC | Working at max temperature 200ºC | |||||
Air and oxygen contain gases | gases with Nitrogen | gases with sulfur oxidability | gases with sulfur reductibility | carburization | |||
| Manganin43 | good | bad | bad | bad | bad | good | |
Style of supply
| Alloys Name | Type | Dimension | ||
| Manganin43W | Wire | D=0.03mm~8mm | ||
| Manganin43R | Ribbon | W=0.4~40 | T=0.03~2.9mm | |
| Manganin43S | Strip | W=8~200mm | T=0.1~3.0 | |
| Manganin43F | Foil | W=6~120mm | T=0.003~0.1 | |
| Manganin43B | Bar | Dia=8~100mm | L=50~1000 | |
Products and services
1. CE and RoHS cerfication;
2. Small orders are accepted;
3. Factory direct sale;
4. Timely delivery;
5. Samples are available;
Application of Manganin
Manganin foil and wire is used in the manufacture of resistor,
Particularly ammeter shunt, because of its virtually zero
temperature coefficient of resistance value and long term
stability.
The copper-based low resistance heating alloy is widely used in
low-voltage circuit breaker, thermal overload relay, and other
low-voltage electrical product. It is one of the key materials of
the low-voltage electrical products. The materials produced by our
company have the characteristics of good resistance consistency and
superior stability. We can supply all kinds of round wire, flat and
sheet materials.
Copper nickel alloy series:Constantan CuNi40 (6J40), CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23,CuNi30, CuNi34, CuNi44.
