|
[China]
Trade Verify
Address: No. 388 Pangu Road, Baoshan district, Shanghai, 201999, China
Contact name:Martin Lee
Shanghai Tankii Alloy Material Co.,Ltd |
|
Verified Suppliers
|
|
|
Electronic Packaging Precision Pipes
Use special equipment such as cold rolling, cold pull, lighting,
and gas tight testing, and then use CNC cutting, precision
polishing and other methods to complete the manufacturing of short
tube parts;High accuracy inner and outer inner and outer inner and
outer pipes,.good smoothness, surface anaerobic layers, the outer
surface roughness is controlled within RA0.2, and the inner
roughness is controlled within RA0.6:
The short tube parts after cutting are usually within ± 0.05. There
is no burrs at the mouth, and the appearance of 20 times the
appearance of the microscope is not conventional. The guide angle
is below -0.1;The length is 0.8~2000mm, the wall thickness is
0.015~1.5mm, and the outer diameter is 0.3~20mm.
Conventional materials: 4J29,4J50,4J36, Alloy52, Inconel, etc.
mm | W.T. /mm | |||||||||||||
| ≥0.015 | ≥0.02 | ≥0.05 | ≥0.10 | ≥0.20 | ≥0.30 | ≥0.40 | ≥0.50 | ≥0.60 | ≥0.70 | ≥0.80 | ≥0.90 | ≥1.00 | ≥1.5 | |
| ≥0.3 | - | - | - | |||||||||||
| ≥0.5 | - | - | - | - | - | |||||||||
| ≥1.0 | - | - | - | - | - | - | - | |||||||
| ≥1.5 | - | - | - | - | - | - | - | - | - | |||||
| ≥2.0 | - | - | - | - | - | - | - | - | - | |||||
| ≥3.0 | - | - | - | - | - | - | - | - | - | - | ||||
| ≥4.0 | - | - | - | - | - | - | - | - | - | - | - | |||
| ≥5.0 | - | - | - | - | - | - | - | - | - | - | - | - | ||
| ≥6.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| ≥7.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| ≥8.0 | - | - | - | - | - | - | - | - | - | - | - | - | ||
| ≥9.0 | - | - | - | - | - | - | - | - | - | - | - | |||
| ≥10.0 | - | - | - | - | - | - | - | - | - | - | ||||
| ≥15.0 | - | - | - | - | - | - | - | - | - | |||||
| ≥20.0 | - | - | - | - | - | - | - | - | ||||||
