|
[China]
Trade Verify
Address: No. 388 Pangu Road, Baoshan district, Shanghai, 201999, China
Contact name:Martin Lee
Shanghai Tankii Alloy Material Co.,Ltd |
|
Verified Suppliers
|
|
|
DIN125 Packed Alloy 60 Alloy30 CuNi2 CuNi6 CuNi10 Resistant Wire Single Wire Used For Automobile Heating Elements
Product Description
Copper nickel alloy Wire with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". it also shows better corrosion resistance, and welding performance.
The copper-based low resistance heating alloy is widely used in
low-voltage circuit breaker, thermal overload relay, and other
low-voltage electrical product. It is one of the key materials of
the low-voltage electrical products. The materials produced by our
company have the characteristics of good resistance consistency and
superior stability. We can supply all kinds of round wire, flat and
sheet materials.
DIN spools are available for the package as per your requests.
Stranded or bunch wires are available if you need.
Enamelled wire can be tailor-made.
Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
Cd | Pb | Hg | Cr | ||||||
| 2 | - | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 200ºC |
Resisivity at 20ºC | 0.05±10%ohm mm2/m |
Density | 8.9 g/cm3 |
Melting Point | 1090ºC |
Tensile Strength,N/mm2 Annealed,Soft | ≥220Mpa |
Elongation(anneal) | 25%(Min) |
Elongation(cold rolled) | ≥Min)2%(Min) |
EMF vs Cu, μV/ºC (0~100ºC) | -12 |
Micrographic Structure | austenite |
Magnetic Property | Non |
| Type | Electrical resistivity (20degreeΩ mm²/m) | Temperature coefficient of resistance (10^6/degree) | Density g/mm² | Max. temperature (°c) | Melting point (°c) |
| CuNi1 | 0.03 | <1000 | 8.9 | / | 1085 |
| CuNi2 | 0.05 | <1200 | 8.9 | 200 | 1090 |
| CuNi6 | 0.10 | <600 | 8.9 | 220 | 1095 |
| CuNi8 | 0.12 | <570 | 8.9 | 250 | 1097 |
| CuNi10 | 0.15 | <500 | 8.9 | 250 | 1100 |
| CuNi14 | 0.20 | <380 | 8.9 | 300 | 1115 |
| CuNi19 | 0.25 | <250 | 8.9 | 300 | 1135 |
| CuNi23 | 0.30 | <160 | 8.9 | 300 | 1150 |
| CuNi30 | 0.35 | <100 | 8.9 | 350 | 1170 |
| CuNi34 | 0.40 | -0 | 8.9 | 350 | 1180 |
| CuNi40 | 0.48 | ±40 | 8.9 | 400 | 1280 |
| CuNi44 | 0.49 | <-6 | 8.9 | 400 | 1280 |
Our advantages:
a) We can provide high quality material, excellent design, precise
manufacturing,complete specifications, considerate and integrity
serivices.
b) We can provide all kinds of electric heating alloy material and
elements, including customized products.
c) We can provide a complete solution for you.
d) OEM service can be provided.
e) Product selection
f) Process optimization
g) New product development
Product picture:
Package:
