|
[China]
Trade Verify
Address: China Factory : Suzhou Industrial Park, JiangSu Province,China
Contact name:amy
BEST PIPELINE EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Professional Manufacturer of Street light steel lamp in High Steel , Surface : High Quality Galvanized
Material : Steel tube from hot rolled steel grade S235JR acc to EN10025 Manufactured to EN10219
Surface Protection :Hot dip galvanized acc to International Standard EN ISO 1461
Certificates : CE certificates of Notified Europen body EN40 .
Design Standard : USA Standard
Wind speed : more than 30M/Sec
Anti-seismic design : more than level 7
Raw material : ASTM A572 GR65 /Q345/GR50 /Q235
Our street light steel lamp Features/Benefits
Lower Initial cost
Steel Structures found in many specifications
Simple to Install
Allows for taller Structures
Our tubes are tested , we have ourself steel factory , our tubes
meet rigorous standard of quality
| Height | From 1 m to 20 m |
| Suit for | Airport ,seaport,plaza,stadium ,square,highway,street way etc |
| Shape | Conoid ,Multi-pyramidal,Columniform,polygonal or conicalR |
| Raw Material | Usually Q345B/A572, Q235B/A36,As well as Hot rolled coil from Q460
, |
| Lamp power | 200 W- 2000 W (HPS/MH) |
| Torlance of the dimenstion | +- 1% |
| Optical assembly of lighting fixture | IP 65 |
Mast Structure : 8/12/16/20 Side /Round conical
Why choose us
Welcome sample orders , we are the direct manufacturer
We have the advanced equipments to support OEM order , As
long as you send the drawings to US ,
Then we build the good cooperation from that time
Free professional engineer 1V1 for project guidence
Brackets:Single or double brackets are in the shape and dimension as per customers requirement
Welding:Welding confirms with international welding standard of CWB
Base plate mounted:Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement
Ground mounted:The length buried underground as per customers requirement
Galvanizing Or Powder Coating:Hot dip galvanization with thickness of 80-100µm average
Specification
1) Pold Shaft steel Material : Q235B
2:All the steel are hot dip galvanzied in Accoring with ASTM
A123/M
Steel Lighting poles &Masts
The steel pole design , at firist sight , seems to be eays problem to solve
According to EU Standard EN40 for poles up to 20m need only static calculations .
Production of Street light steel lamp
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or |
| Joint of Poles | Insert mode,inner flange mode,face to face joint mode |
| Design of pole | Against earthquake of 8 grade |
| Wind Speed | 160 Km/Hour |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We has past flaw testing.Internal and external double welding makes |
| Thickness | 1 mm to 30 mm |
| Production Process | Raw material test → Cutting →Molding or bending →welding |
