Home Companies BEST PIPELINE EQUIPMENT CO.,LTD

EN10204 -3.1 /3.2 Alloy Steel Seamless Tubes TEVI FARA SUDURA PENTRU CONDUCTE

Contact Us

[China]

Trade Verify

Address: China Factory : Suzhou Industrial Park, JiangSu Province,China

Contact name:amy

BEST PIPELINE EQUIPMENT CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

EN10204 -3.1 /3.2 Alloy Steel Seamless Tubes TEVI FARA SUDURA PENTRU CONDUCTE

Country/Region china
City & Province suzhou jiangsu
Categories Steel Profiles

Product Details

SEAMLESS
The complex chemical and physical properties of the various grades of carbon steel pipe
allow for a broad range of service usage. American Piping Products has the right grade,
size and price to meet your requirements including A/SA106 Grade B/C and API 5L X-42
through X-70. A/SA106 Grades B & C are utilized for services ranging from structural
supports to steam drum headers with temperature ranges up to 800°, API 5L X Grades
42 through 70 are utilized for the water and petroleum industry to transport liquids or
as platforms on offshore rigs.
½˝ nominal to 24˝ O.D. seamless pipe
Wall thickness: Schedule 40 up to 4.000˝
STANDARD CARBON STEEL PIPE SPECIFICATIONS & GRADES
A/SA106B/C
A/SA53B
FLANGES & FITTINGS
Carbon steel butt-weld fittings: A/SA234 WPB * WPC
Carbon steel forged fittings: A/SA105
Carbon steel flanges: A/SA105

WELDED
American Piping Products distributes an extensive selection of welded pipe including
Electronic Resistance Welded (ERW), Electronic Fusion Welded (EFW) and Double
Submerged Arc Welded (DSAW) carbon steel pipe along with their respective flanges
and fittings. We also carry A139 – Grade B and A252 Grades 2 & 3 spiral weld pipe
along with A691 chrome-moly pipe.
Carbon (ERW, EFW & DSAW) Pipe
¾˝ nominal to 60˝ O.D.
Wall thickness: Up to 1.500˝

4130 PIPE
Seamless pipe is tubing made to the pipe schedule. Alloy pipe in the power industry
generally refers to A335 material, but in the oil and gas market 4130 pipe is used.
This product is made to the pipe schedule but uses A519-4130 as the controlling
seamless specification. The material is then heat-treated to L80, P110 or the
customer’s specified properties. This material is easily welded and is generally used
for above-ground applications and utilizes the fittings, flanges and other piping
components with the same 4130 chemistry. This product is a good alternative
to replace X65 through X80 piping items where the usage or repair is too small for
mill production.
A519 – 4130
L80 and P110 heat-treated mechanicals
NPS 2˝ to 12˝
Schedules 120 through XXH
Non-scheduled walls through 1½˝

HIGH-SPEED STEEL

It is used for making tools, from which performance is required in addition to the high ductility (twist drills, threading tools, segments for circular saw blades, broaches), as well as some tools to work in the cold (punches to punch), also working tools roughing and finishing of high strength steels at high cutting speeds for machining stainless steels and stainless steels, to work on the machine, peelers (high-end mills, lathe and planer knives, drill bits, threading tools, segments and saw blades, milling cutters worm).

Technical specifications:

PNENWerkstoff nrAISI
SW7MHS6-5-2C1.3343M2
SW18HS18-0-11.3355T1
SK5MHS6-5-2-51.3243 
SK10VHS10-4-3-10

1.3207

 

It is used for the production of simple hand tools such as axes, hatchets, hammers and ordinary blacksmith, anvil, blacksmith tools support, files, knives, dies, markers, engraving tool, drag rings, punches punching knives, leather and paper.

Technical specifications:

PNENWerkstoff nrAISI
N8EC80U1.1525W1 - C=0,8%
N9E  W1 - C=0,9%
N10EC105U1.1545W1 - C=1,0%
N12EC125U1.1563W1 - C=1,2%

 

HOT-WORK TOOL STEEL

Used to catalog the elements of molds for pressure die casting, extrusion tools for low-melting alloys, die inserts, dies, stamps, punches, dies, working under heavy load, dies hammer of medium size and deep grooves, loaded with inserts die, extrusion tools, shoes thread rolling, drawing dies, dies for iron alloys, etc.

Technical specifications:

PNENWerkstoff nrAISI
WCLX37CrMoV5-11.2343H11
WCLVX40CrMoV5-11.2344H13
WNL55NiCrMoV71.2714L6
WLV32CrMoV12-281.2365H10
WWS1X30WCrV5-31.2567 
WWVX30WCrV9-31.2581H21

COLD-WORK TOOL STEEL 

 

Used in the production of tool kits for punching and cutting tools for sheet metal, thread rolling jaws of cold, dies and punches to the extrusion blade for cutting wood and metal, pneumatic chisels, punches, cutters, dies for cold, form into bending, straightening rolls, etc.

Technical specifications:

PNENWerkstoff nrAISI
NC6   
NC10   
NC11X210Cr121.2080D3
NC11LVX153CrMoV121.2379D2
NMV90MnCrV81.2842O2
NZ360WCrV81.2550S1

 

Carbon steel is used in the production of medium-bearing, such as axles, crankshafts, eccentric, and toothed, spindles, rollers, pump rotors, pistons, levers, wedges, rods, screws, rings, etc.

Non-alloy steel arise from the construction, welded, riveted and joined with screws operating at ambient temperature.

Cutting steel is used for machining on automatic and high-speed machine tools for threading.

Technical specifications:

PNENWerkstoff nrAISI
20C221.11511020
45C451.11911042
55C551.12031055
St5S275J21.0145 
R35E235N1.03081010
P355P355GH1.0473 
ST3SS235JR1.0038 
18G2AS355J2G31.0045 
A1OX11SMn30/9SMn281.0715 
 11SMnPb281.0718 

 

 

Appropriate for the production of heavily loaded, exposed to shocks, torsion or vibration, such as shafts, crankshafts, rotors, blades of steam turbines, spindles, levers, axles of vehicles, connecting rods, shafts, pumps and presses, parts control, rings.

Technical specifications:

 
PNENWerkstoff nrAISI
36HNM36CrNiMo41.65114340
34HNM34CrNiMo61.65824337
40H41Cr41.70355140
25HM25CrMo41.72184130
35HGS   
40HM42CrMo41.72254140

 

Suitable for machine parts with high strength core with very high surface hardness.

Technical specifications:

 
PNENWerkstoff nrAISI
40HMF40CrMoV4-61.7711 
38HMJ41CrAlMo7-101.8509D6

 
Practical for the production of machine parts with required surface layer with high hardness and ductile core, such as gears, screws, shafts, sleeves, large size – parts to be very high pressures and loads.

Technical specifications:

PNENWerkstoff nrAISI
16HG16MnCr51.71315115
15HN17CrNi6-61.5918 
17HNM18CrNiMo7-61.65874820
18GHT   
20HG20MnCr51.71475120
18H2N219CrNi81.2722 

 
Name : WB36 (T36/P36, 15NiCuMoNb5-6-4) HOT ROLLED TUBES FOR HIGH TEMPERATURE AND PRESSURE APPLICATIONS​
 
 
Definition : 
 
WB36 is a bainitic Ni-Cu-Mo steel micro-alloyed with niobium. It is also known as 15NiCuMoNb5-6-4 according to EN 10216-2 and VdTÜV377/2, T36 according to ASTM A 213 and P36 according to ASTM A 335.

Application:  

This grade is mainly used in high-pressure, medium-temperature feedwater lines (close to 400 °C).

Challenges :  
 
WB36 exhibits excellent high-strength properties up to 450 °C. The reduced weight of the feedwater piping components compared with conventional carbon steel allows improved resistance to thermal fatigue and very good heat transfer.
 
Key advantages of Best Pipeline include:

  • Production and delivery of our own steel products, especially boiler pipes made of X10CrMoVNb9-1 and X10CrWMoVNb9-2 grades as well as other materials designed for high-temperature service
  • Design of the boiler parts, pipeline elements, Y-fittings and T-fittings
  • Prefabrication and assembly of boiler and industrial piping
  • Services:
    • technical consultations on preparing delivery, production and assembly contracts/agreements in order to provide a constant control/inspection over fulfilling the requirements listed in the “Delivery Technical Conditions” and “Construction and Commissioning Requirements”.
    • inspection and control over technological processes as per contracts/agreements in order to assure their realisation within the agreed time, cost reduction and quality of the final product
    • examination and testing followed by the final acceptance performed by the Notified Bodies. Additional creep tests of materials designed for the high-temperature service
    • free of charge preliminary examinations of pipelines in service using a portable SFM to determine their life assessment and evaluate the necessity of repairs, modernisation or further investments.

 

1. steel pipes for pressure equipment. Unalloyed steel pipes with specified room temperature properties – manufactured in accordance with PN-EN 10216-1 standard:

P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2
 

2. pipes for pressure purposes in elevated temperatures – boiler pipes – manufactured in accordance with PN-EN 10216-2 standard:P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 13CrMo4-5, 10CrMo9-10, X10CrMoVNb9-1, X10CrWMoVNb9-2
3. pipes for pressure purposes made of fine-grained steel – manufactured in accordance with PN-EN 10216-3 standard:

Standard quality: P355N, P460N, P620Q, P690Q;

  • For application at elevated temperatures: P275NH, P355NH, P460HN, P620QH, P690QH;
  • For application at low temperatures: P275NL1, P355NL1, P460NL1, P620QL, P690QL1;
  • For application at special low temperatures: P275NL2, P355NL2, P460NL2, P690QL2
4. pipes for pressure purposes made of alloyed and unalloyed steel for application at low temperatures – manufactured in accordance with PN-EN 10216-4 standard:

P215NL, P255QL, P265NL, 26CrMo4-2, 11MnNi5-3, 13MnNi6-3, 12Ni14, X12Ni5, X10Ni9

5. seamless steel pipes for pressure purposes – pipes made of corrosion-resistant steel – manufactured in accordance with PN-EN 10216-5 standard:

X2CrNi18-9, X2CrNi19-11, X5CrNi18-10, X6CrNiTi18-10, X6CrNiNb18-10, X2CrNiMo17-12-2, X5CrNiMo17-12-2, X1CrNiMoN25-22-2, X6CrNiMoTi17-12-2, X2CrNiMo18-14-3, X1NiCrMoCu25-20-5, X2CrNiMoN22-5-3, X15CrNiSi25-20
 

6. steel pipes for transportation of combustible fluids – pipes of requirement class A – manufactured in accordance with PN-EN 10208-1 standard:

L210GA, L235GA, L245GA, L290GA, L360GA
 

7. steel pipes for transportation of combustible fluids – pipes of requirement class B – manufactured in accordance with PN-EN 10208-2 standard:

L210GA, L235GA, L245GA, L290GA, L360GA
 

 
 

 
 
 
 
 

Hot Products

Product Name : Pig Launcher And Receiver (PLR)Standard :NACE ASME B31.3, B31.4, B31.8 ASME U Stamp ...
Name : T24 (7CrMoVTiB10-10) ferritic/bainitic-martensitic steel developed by Vallourec This alloy ...
Product Name : Dimensions and weights of seamless tubes according to standards EN, DIN, BS, UNI, NFA...
Production Information : Name SSAW/Spiral Welded steel pipes 2.Standard API5L, ASTMA252, ASTMA139, ...
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm Product Information : ...
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm Product Information : ...