|
[China]
Trade Verify
Address: China Factory : Suzhou Industrial Park, JiangSu Province,China
Contact name:amy
BEST PIPELINE EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Name : EN 10297-1 20MNV6 High Pressure Cylinder tube H8 With alloy
Steel Material
Hard chrome plated barsteel Cromax® 280X/20MnV6 and C45E.
The bar is ready to use and has a diameter tolerance of f7.
The thickness of the chrome layer is minimum 20 μm; sizes <20 mm
minimum 15 μm. The surface roughness (Ra) is maximum 0,2 μm
(cut-off 0,8 mm).
The surface hardness is minimum 800HV.
The X added to the 280 grade is giving clearly higher mechanical
properties
for the sizes 25 - 80 mm.
The hard chrome plated bars will be mainly used as pistonrods for
hydraulic and
pneumatic cylinders. In an agressive environment, like the process
industry,
in the mining industry, along the shore, on the roads and in the
offshore-industry,
one could use bars of chrome plated stainless steel bars or nickel
chrome plated bars
EN 10297-1 Grade 20MnV6 Properties
| Chemical Properties | |||||||||
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
| 0.16-0.22 | 0.10-0.50 | 1.30-1.70 | 0.035 | 0.04 | – | – | – | – | V max 0.15 |
| Mechanical Properties | |||||||||
| Yield Strength | Tensile Strength | Elongation A5 min | |||||||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage | ||||
| 600 | – | – | 19 | ||||||
| Equivalent Designation | |||||
| DIN | EN | BS | NFA | ASTM | ASME |
| – | EN 10297-1 Grade 20MnV6 | – | – | – | – |
Straightness
The maximum deviation from the straight line is 1 mm on a gauge length of 1000 mm.
Ovality
The maximum out-of-roundness is 65% of the total outer diameter tolerance.
All tubes are supplied with clean, square cut ends.Deburring and/or chamfering can be carried out on request.
Tubes are supplied normally without anti-corrosive treatment, but anti-corrosive treatment is available and is carried out on request.
EN 10297-1 20MNV6 High Pressure Cylinder tube Pictures
