Active Member
|
[China]
Address: cangzhou MengCun Industrial Zone , CangZhou City ,Hebei China
Contact name:Huang
TENARIS ENGINEERING CO., LTD |
|
Product Information :Seamless precision steel tubes EN 10305-1 Steel grade (EN) E235 E355 +C (BK) +N (NBK) +SR (BKS)
PRODUCT | ASTM A106 carbon seamless steel pipe | ||
Material | ST52, ST35, ST42, ST45, X42, X46, X52, X56, X60, X65, X70 | ||
Standard | API SPEC 5L, ASTM A 53M, ASTM A 106M, | ||
Surface | Black paint, varnish, oil, galvanized | ||
Pipe Length | Fixed length, random length or as required | ||
Pipe Ends | Plain Ends, Beveled Ends | ||
End Protector | 1. Plastic caps (small OD) 2. Iron protector (large OD) | ||
Application | Fluid pipe, oil pipe, gas pipe, structure pipe, boiler tubes | ||
Test | Chemical Component Analysis, Mechanical Properties, Technical
Properties, Exterior Size Inspection, Hydro static Test, X-ray
Test. | ||
Productivity | 20000 tons per month | ||
Min Order | 10 ton | ||
Remark | Special design available according to requirement | ||
Product Show :
Product Detailed information :
| Chinese | English | ||||||
| Outside Diameter | Wall Thickness | Outside Diameter | Wall Thickness | ||||
| 17mm-355mm | 2.5mm-45mm | 3/8 to 14 inch | SCH40 to XXS | ||||
| Material and Standard | |||||||
| Item | Chinese Standard | American Standard | German Standard | ||||
| 1 | 10# | A53A | St37 | ||||
| A106A | St37-2 | DIN17175 | |||||
| A179C | St35.8 | DIN1629 | |||||
| 2 | 20# | ASTMA106-B | St45-8 | DIN17175 | |||
| ASTMA53-B | St42-2 | DIN1626 | |||||
| ASTMA178-C | St45-4 | DIN1629 | |||||
| 3 | 45# | ASTMA1045 | CK45 | ||||
| 4 | 16Mn | ASTMA210-C | St52 | DIN1629/3 | |||
| St52.4 | DIN1629/4 | ||||||
| 5 | 37Mn5 | J55 | |||||
| Note | |||||||
| 1)Packing | Paint on the pipe and plastic covers at the ends | ||||||
| 2)Payment | T/T or L/C | ||||||
| 3)Use Place | Structure,Transport gas and oil,making machine part and so on | ||||||
Standards:
EN 10210-1 Hot finished structural hollow sections of non-alloy and fine
grain structural steel.
DIN 17121 Seamless structural steel circular tubes for structural
engineering purposes.
DIN 17124 Seamless circular tubes of fine grain steel for engineering
purposes.
Steel grades:
according to EN 10210-1: S235JRH, S275J0H, S275J2H, S275NLH, S355J0H, S355J2H, S355NH,
S355NLH, S420NH, S420NLH, S460NH, S460NLH
Steel designation for hollow sections of non-alloy steel
Steel designation for hollow sections of fine grain steel
according to DIN 17124: EStE255, EStE285, EStE355, EStE420, EStE460, RSt37-2, St37-3, St44-2, St44-3, St52-3, StE255, StE285, StE355, StE420, StE460, TStE255, TStE285, TStE355, TStE420, TStE460
Outside diameter: from 10,2 mm to 139,7 mm
Wall thickness: from 0,5 mm to 12,5 mm
Dimensions and weight of seamless steel tubes according to EN 10220
Tubes from outside diameter D ≥ 21,3 mm and wall thickness T ≥ 2,3 mm are supplied hot finished. Other dimensions and precision tubes are produced by cold drawing.
Packing
Structural hollow sections are supplied in packages with a circular
or hexagonal diameter with a weight of 300 to 3500 kilograms. The
tubes are bound with a steel band. It is also possible to wrap
tubes in plastic sheets, burlap or in wooden crates.
Surface protection
It is possible to galvanize all construction steel grades, but the
quality, appearance and thickness of layer depend on the chemical
composition of steel (Si + P). To avoid the corrosion process it is
recommended that the content of Si + P was in the range of 0.13% –
0.28%.
