Brief Introduction:
Single column hopper lifting blender an elevating type rotary mixer
consists of machine base, rotary frame, driving system, elevating
system, braking system and PLC control system. It can automatically
fulfill clamping, elevating and rotating. . It’s the desirable
final mixing equipment for pharmaceutical factories, much more
chemical industry, raw medical material industry, foodstuff
industry, etc.
Achieve the divided working procedure with the special lifter.
Increase the space area and rise the recycle working intensity,
also have higher cost.
Principle:
Single column Bin blender has remarkable working principle, as the
bin is lifted to the required height and clamped. The driving
system starts to work and mix according to time and speed assigned
in advance after the pressure sensors receive signal of tightly
clamped. Reaching to the parameters assigned in advance, the rotary
frame stops vertically. The mixing craft is over. The lifting
system then works accordingly to lay down the bin. The printer
types the entire craft data automatically and reliable. The working
cycle finishes.
Features:
1. The mining co efficiency reaches to 99%, and charging
coefficient ranges from 50% to 80%
2. Applying infrared appliances to gain an isolated working area,
and butterfly valve against wrong way operation, controlled by PLC
control system.
3. It can clamp bins of different model and volume, so it adapts to
the mixing demands of large output and diversity products.
4. This machine is easy and quickly to operate. All operations were
simplified in an automatic operation process.
5. It could save space, and it is light than original mixer, thus
fit for building floor installation.
6. it’s equipped with safeguard system to ensure the center of
gravity always balanced within the safety range. Thus it always
works stably and reliably without vibration.
6. Mixing extent is large, which improves the motion of material
inside bin and avoids material separation, enhancing mixing
uniformity.
7. It has lifting function. After mixing procedure, it could
discharge material in place thus saving the transfer procedures and
reduce the working strength.
8. It can work with weighting system according to the requirements
of clients. This system could be connected with PLC.
9. Control the material discharging uniform automatically, easy to
control and calculate the batch of transportation.
10. Automatic pneumatic discharge control which avoid the operator
to climber with un-safety.
11. Separated control cabinet which avoid any hurt of the workers.
12. Double layers skirts type discharging device with no powder
leakage, and confirms to GMP requirements.
Technical parameters:
Model Parameters | HTD-50 | HTD-100 | HTD-200 | HTD-300 | HTD-400 | HTD-600 | HTD-800 |
Total power | 2.95 Kw | 2.95Kw | 3.7 Kw | 3.7 Kw | 3.7 Kw | 5.2 Kw | 5.2 Kw |
Frequency | 50 Hz |
Voltage | 380 V |
Load yield | 50～80% |
Overall dimension： L×W×H | 2100×1700×2400 | 2200×1750×2500 | 2400×1750×2600 | 2800×2200×2800 | 2800×2200×2800 | 3200×2350×2800 | 2800×2500×2800 |
Turnover direction | Two ways |
Machine weight | 750 | 850 | 900 | 1000 | 1100 | 1300 | 1500 |
Bin specification | 50 | 50 100 | 50 100 200 | 200、300、 400、600、800 |
Noise dB(A) | ≤75 |
Electric components list of HTD-300
No. | Name | Origin |
1 | Reducer | MC, Shanghai |
2 | |
