|
[China]
Trade Verify
Address: No.509, Maoshan Avenue, Zhulin Town, Jintan District, Changzhou City. Jiangsu Province
Contact name:Xu Jinglin
Jiangsu Yunneng Precision Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Heat Exchange Tube 1050A Aluminum Alloy Tube 1 Series Aluminum Alloy Φ28mm
Product Description:
The aluminum alloy tube used in heat exchanger mainly produces 3 series aluminum alloy, 1 series aluminum alloy, 6 series aluminum alloy, 5 series aluminum alloy.
It is mainly used in various cooling and heat exchanger exchange tubes. This kind of pipe is widely used in air-conditioning, refrigerator, heating and air-conditioning equipment. The products can be supplied with different state specifications of ruler tube and coil tube. Our products are produced by large extruder, with advanced production process and special heat treatment process, strict control of a variety of processes, high precision, low leakage rate, good quality. The induced density is high. The utility model can meet the use demand of the back channel of the expansion pipe of the customer. Product specifications and performance can be customized according to customer requirements. The length of the product can be 18 meters.
The company has a full set of aluminum tube production equipment, aluminum tube testing, strict control of the production process, to ensure product quality and mechanical performance is good, higher accuracy, tolerance range is small. It can be controlled in the range of + 0.02 mm.
Is a company specializing in high-quality precision aluminum tube material research and development, production, sales, with a complete industrial chain of high-tech Enterprises.
Heat Exchanger Aluminum Tube
The main production specifications are listed as follows:
| Model Number | State | Wall Thickness mm | Tensile Strength MPa | Non-proportional Elongation Strength MPa | Elongation After Break A50mm |
| 1050 1060 1070 1050A | O | ≤20.00 | 60~95 | ≥70 | ≥25.00 |
| H14 | ≤10.00 | 100~135 | ≥70 | ≥5.00 | |
| 3003 3103 3A21 | O | ≤20.00 | 95~130 | ≥35 | ≥25.00 |
| H12 | ≤15.00 | 115~150 | ≥75 | ≥12.00 | |
| H14,H24 | ≤10.00 | 135~165 | ≥110 | ≥6.00 | |
| H28 | ≤3.00 | ≥180 | ≥145 | ≥3.00 |
The specifications in the form can be customized according to customer's requirements.
Condensator
Evaporimeter
Air-conditioning
Icebox
Home freezer
Industrial freezer
Cold storage with cold exhaust pipe
Small warm wind
Lipstick shell
Eyebrow pen shell
Air conditioning connection pipe
Car water tank connecting pipe
Car air-conditioning connection pipe
Microchannel heat exchanger connecting tube
etc.
Coil pipe
Raw material procurement-inspection-cleaning-extrusion-coiling-heat
treatment-flaw detection -forming-inspection-finished product
packaging
Stright pipe
Raw material
procurement-inspection-cleaning-extrusion-coiling-straightening-flaw
detection-fine cutting-cleaning-heat treatment-inspection-finished
product packaging
We support and provide technical services for the use of aluminum
pipes and assist customers to solve the production problems arising
during the actual use process. Including the performance detection
of aluminum pipe, technical analysis, the use of the back channel,
aluminum pipe welding, aluminum pipe pipe, aluminum pipe bending,
finished product leakage detection, etc., at the same time in the
use of related problems, we will also assist customers to solve
problems in the first time. And make corresponding adjustments
according to the actual situation.
Q1: What kind of material alloy is the product?
A1: Currently, there are 1 series, 3 series, and 6 series aluminum
alloy.
Q2: What state and performance of the aluminum pipe can be
produced?
A2: can produce from hard state to soft state and interval
performance products
Q3: Can I customize the product specifications and requirements?
A3: Different specifications and states can be customized according
to the requirements, such as fixed ruler straight pipe and coil
pipe
Q 4: What is the minimum starting order volume?
A 4: The minimum order volume is 3 tons.
