Very High - When set to Very High, the suspension automatically lowers to the default ride height* (Standard or Low) after driving approximately 100 feet (30 meters) or when driving speed reaches 15 mph (24 km/h). To maintain the Very High setting for an unlimited distance until your driving speed reaches the speed threshold, touch Keep until 15 mph.

High - When set to High, the suspension automatically lowers to the default ride height* (Standard or Low) after driving approximately 100 feet (30 meters) or when driving speed reaches 35 mph (56 km/h). To maintain the High setting for an unlimited distance until your driving speed reaches the speed threshold, touch Keep until 35 mph.

Standard - The Standard setting ensures optimum comfort and handling under all loading conditions.

Low - Lowering the height can improve aerodynamics, make it easier to load or unload cargo and passengers, and improve handling.

*If the Default Ride Height to Low setting is turned off, the ride height is adjusted between Standard and Low to balance ride comfort with handling and range. To optimize handling and range, turn on the Default Ride Height to Low setting.

CAUTION

Avoid driving aggressively (hard accelerations, sharp turns, etc.) when the suspension is set to High or Very High. Doing so can cause vibration and increase the possibility of damage.

Adaptive Suspension Damping

The settings associated with Adaptive Suspension Damping provide real-time adjustments to the suspension system to optimize both ride and handling. Choose from:

Comfort - Provides a gentler ride for a relaxed driving experience.

Auto - Adjusts to a wide range of roads and driving styles, providing a fluid yet well controlled ride.

Sport - Provides a firmer, more controlled ride that increases driver engagement and connection to the road.

Advanced - Can be used to fine tune the suspension by dragging individual sliders that adjust Ride Comfort and Handling.

Touch Show Suspension Data to display detailed information about the dampers for each wheel, including ride height, compression and rebound values, and body accelerations.

Use Comfort Damping in Autopilot (if equipped) - By default, damping automatically sets to the Comfort setting when using Autopilot, and reverts back to your chosen setting when Autopilot is no longer in use. Turn this setting off to disable this feature.

Real-time Visualization

The image of your Model S on the Suspension screen provides a real-time visualization of the status of the air suspension system. In addition to visually showing changes to the ride height, it displays Compression and Rebound lines that reflect how the suspension system is controlling the dampers for each wheel based on your chosen settings and changing road conditions. Both are controlled simultaneously. Touch Show Suspension Data to display detailed information about the dampers for each wheel, including ride height, compression and rebound values, and body accelerations.

Note

The instrument panel can also display a real-time visualization of how the suspension system is dynamically adjusting each wheel’s damping to account for changing road conditions. To view, hold the respective steering wheel scroll button briefly until the available options are displayed. Roll the scroll button to highlight Suspension, then tap the scroll button.

Auto-Raising Locations

Whenever you raise the suspension to High or Very High, the location is automatically saved. By saving the location, you do not need to manually raise the suspension every time you arrive at a frequently-used location where you have previously raised the suspension. When you return to the saved location, Model S raises the suspension and the instrument panel displays a message indicating that the suspension is being raised.

When saving locations, Model S also saves the Keep until XX mph setting (if specified).

Note

When returning to a saved location and driving faster than the High and Very High suspension settings allow, the suspension does not raise until Model S slows down

After leaving a saved location, the suspension automatically lowers. However, it may not lower until Model S meets the speed and distance threshold at which the suspension lowers.

If Model S reaches a saved location and the existing suspension setting is already higher than the level that has been saved for that location, the ride height is not adjusted.

To remove an auto-raising location

If you do not want the suspension to automatically raise at a location, touch to deselect Always raise at this location in the popup that appears when you arrive at a saved locatio

Self-Leveling

Model S equipped with air suspension automatically self-levels, even when power is off. To prevent damage when jacking or lifting the vehicle, you must activate Jack Mode to disable self-leveling (press the brake pedal and touch Controls

About:

Foshan Shunde Honggu Auto Parts Manufacturing Co., Ltd. Lies in Guangdong. The company introduces the advanced European and American technology, adheres to the concept of technology and quality first, adopts advanced materials, structural designs, manufacturing process and testing standards, to provide customers with safe, stable and cost-effective products. Our Company mainly develop Air spring, Air suspension ,air compressor and suspension parts for luxurious cars of after-sales markets,including Mercedes Benz, BMW,Audi, Land Rover,Porsche, VW and so on. High-top quality and competitve price help us win good reputation from our clients.And Our main markets come from Europe,Middle East, Russia and USA.

Company Culture:

Company philosophy: take it from the society and serve the society
Development philosophy: dedicated to air spring technology research, build international top air suspension products
Company spirit: honesty, innovation, harmony and win-win development

Service:

1.Quality Warranty: according to the clients' request, we could guarantee fron 12 month to 24 months.
2.Delivery time: within 7 days after getting your payments. Regarding the big orders, it need about 15-30 days.
according to our stocck and product task.
3.Quick response: We will reply to our clients within 24 hour and try our best to meet the clients request.
4.Good Service: Be Honest Forever.However you buy one pcs order or you buy more than 1000 pcs, we will sincerely reply to every client.

Advantage

1. we are top 3 of professional air suspension manufacturer in China.
2. our factory has 120 staff, and we only produce 100% newly air suspension products for 10 years.
3. we have cooperated with 80 overseas companies with stable relationships. many are also brands or big sellers at Amazon or EBAY websites.
4. we have our own cars to test our products,except normal test machine and IATF16949:2016 certificate standard.
5. we have complete production line, Mercedes Benz,BMW Audi,Porsche,Land Rover,Volkswagen-these are our products,we has complete products line.
6. Our air suspension/air compressor/air strut/air suspension parts 100% NEWLY manufactured to instead OEM
7. We manufacture air suspension/air strut/air compressor to instead OEM ;
8. Constant temperature workshop for core parts;
9. Japan automatic welding machine to weld

OEM/ODM Service:

- If you want to show your own brand LOGO on the goods such as cable, package bag, label or any where. Our OEM and ODM service is always ready to do it. Please contact with our sales team to get best support.

Packing:
- According to Standard Export Packing.
- Carton box, wooden box, wooden pallet.

Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou