SCANIA 1349840 Monroe CB0067 Cabin Air Springs With SHOCK ABSORBER
REAR 557001 VKNTECH 1S9840-3
DETAILS:
Technical Details
Manufacturer
Guangzhou Viking Auto Parts
Brand
Monroe
Package Dimensions
33 x 16.7 x 12.8 cm; 1.06KG
Item model number
CB0067
Manufacturer part number
CB0067
OEM Part Number
SCANIA 1349840|SCANIA 1424231
Position
Left
Item Weight
1.06 kg
Tips
Important tips to remember when installing a new unit
Check levelling valve, linkage and transmission parts for wear
and damage and if necessary replace the damaged parts.
Check that the shock absorber for leakages and take a shock
absorber test. A defective shock absorber must be replaced.
Once the air lines are disconnected, check their entire length
for cracks or other damage. Replace worn parts.
With the air spring removed, other parts of the air
suspension become more accessible. Check for wear or
damage of the frame hangers, trailing arm bushings, torque
rods, the trailing arms and the air spring mounts. When it is
necessary, also replace parts.
Check bearing for air spring bellow for external
damage, deformation, sharp edges and correct fastening.
Before installing the new unit, clean the air spring
mounting plates to ensure proper attachment to the suspension.
Always use new attaching bolts for the installation
and observe the tightening torques. Never use old
bolts, because these can fall out.
Check the linkage of the levelling valve to see that it
is functioning properly. Under load, the linkage should
move from the neutral position up to the intake position. This
lets air into the springs, which brings the arm back to the
neutral position. This lets air into the springs, which brings
the arm back to the neutral position. That opens the
exhaust valve, allowing air to escape until the arm returns to
the neutral position. Then check the driving level.