FUSO Air Spring Sleeve Model MC056300 For Truck In Asian Market
ME096799 MC096799 MK622244 MB350657 VKNTECH 1S6799
Product Description
Model
Fuso 6D22T
OEM numbers
ME096799/1C4199/MC096799/ MK622244 /MB350657
Working tempreature
-40°C bis +70°C
Description
Cabin Bellow
Technical Data
The VKNTECH 1S6799 air spring can be considered as a replacement
for the Fuso air spring sleeve models MC056300, ME096799, MC096799,
MK622244, and MB350657 used in trucks in the Asian market.
The VKNTECH 1S6799 air spring is designed to provide compatibility
and similar performance to the original air spring sleeves used in
Fuso trucks. It aims to offer a reliable and durable solution for
the suspension system.
To purchase the VKNTECH 1S6799 air spring, you can try the methods
mentioned earlier, such as online marketplaces, automotive parts
retailers, direct contact with VKNTECH, or distributors and
wholesale suppliers specializing in truck parts.
When selecting a replacement air spring sleeve, it is important to
ensure compatibility with the specific Fuso truck model and part
number. Consulting with a trusted supplier or referring to the
vehicle's manual can help determine the appropriate air spring
sleeve replacement.
Remember to compare prices, check for warranty information, and
ensure the authenticity of the product when making a purchase. It's
also recommended to consult with professionals or experts in the
field to ensure you are selecting the correct air spring sleeve for
your specific Fuso truck model.
Our factory
Air suspension Tips
Maintenance of the air springs, Vehicle Check-List
Check the air lines and devices of leakage and that
they turns freely.
Check the bellows bearing for damage, correct
fastening, deformation, sharp edges.
Check the shock absorbers for operation and
impermeability as well as tightness and bearing.
Periodically, check nuts and bolts for proper torque.
For specific recommendations see manufacturer's manual.
Check axle suspension, trailing arms and rods for wear.
Check height control valve to see that it is functioning
properly. A properly maintained valve will save unneeded maintenanceexpense.
Routine inspection of all of the above according to
manufacturer's instructions, will extend the life of your vehicle and reduce
your overall maintenance expense.
Air Spring Installation
Before you start installing air springs, make sure you have
all the necessary tools and equipment to perform the repair
safely.
Familiarize yourself with the suspension on which you are
performing the repair by reviewing the manufacturers
service guide.
If you are in doubt about something, ask for assistance from
a qualified suspension specialist, the suspension
manufacturer or the air spring manufacturer; This can save you
a lot of time and aggravation later in the job.
Important tips to remember when installing a new unit
Check levelling valve, linkage and transmission parts for wear
and damage and if necessary replace the damaged parts.
Check that the shock absorber for leakages and take a shock
absorber test. A defective shock absorber must be replaced.
Once the air lines are disconnected, check their entire length
for cracks or other damage. Replace worn parts.
With the air spring removed, other parts of the air
suspension become more accessible. Check for wear or
damage of the frame hangers, trailing arm bushings, torque
rods, the trailing arms and the air spring mounts. When it is
necessary, also replace parts.
Check bearing for air spring bellow for external
damage, deformation, sharp edges and correct fastening.
Before installing the new unit, clean the air spring
mounting plates to ensure proper attachment to the suspension.
Always use new attaching bolts for the installation
and observe the tightening torques. Never use old
bolts, because these can fall out.
Check the linkage of the levelling valve to see that it
is functioning properly. Under load, the linkage should
move from the neutral position up to the intake position. This
lets air into the springs, which brings the arm back to the
neutral position. This lets air into the springs, which brings
the arm back to the neutral position. That opens the
exhaust valve, allowing air to escape until the arm returns to
the neutral position. Then check the driving level.