Home Companies Beijing Silk Road Enterprise Management Services Co.,LTD

ISO Certified 40ft Lng Storage Tank HC Shipping Container Optional Color

Contact Us

[China]

Trade Verify

Contact name:

Beijing Silk Road Enterprise Management Services Co.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

ISO Certified 40ft Lng Storage Tank HC Shipping Container Optional Color

Country/Region china
Categories Non-Metallic Mineral Deposit

Product Details

 

DNV Certificate 39.90CBM 20ft Container Red color Corten-A Material New Condition

 

 

1.introduction

 

Ninety percent of the global container fleet consists of "dry freight" or "general purpose" containers – both of standard and special sizes.And although lengths of containers vary from 8 to 56 feet (2.4 to 17.1 m), according to two 2012 container census reports[about 80% of the world's containers are either twenty or forty foot standard length boxes of the dry freight design. These typical containers are rectangular, closed box models, with doors fitted at one end, and made of corrugated weathering steel (commonly known as CorTen) with a plywoodfloor.Although corrugating the sheet metal used for the sides and roof contributes significantly to the container's rigidity and stacking strength, just like in corrugated iron or in cardboard boxes, the corrugated sides cause aerodynamic drag, and up to 10% fuel economy loss in road or rail transport, compared to smooth-sided vans.Standard containers are 8-foot (2.44 m) wide by 8 ft 6 in (2.59 m) high, although the taller "High Cube" or "hi-cube" units measuring 9 feet 6 inches (2.90 m) have become very common in recent years. By the end of 2013, high-cube 40 ft containers represented almost 50% of the world's maritime container fleet, according to Drewry's Container Census report.

About 90% of the world's containers are either nominal 20-foot (6.1 m) or 40-foot (12.2 m) long,although the United States and Canada also use longer units of 45 ft (13.7 m), 48 ft (14.6 m) and 53 ft (16.15 m). ISO containers have castings with openings for twistlock fasteners at each of the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to ten units high. Regional intermodal containers, such as European and U.S. domestic units however, are mainly transported by road and rail, and can frequently only be stacked up to three laden units high. Although the two ends are quite rigid, containers flex somewhat during transport.

Container capacity is often expressed in twenty-foot equivalent units (TEU, or sometimes teu). A twenty-foot equivalent unit is a measure of containerized cargo capacity equal to one standard 20-foot (6.1 m) long container. This is an approximate measure, wherein the height of the box is not considered. For example, the 9 ft 6 in (2.9 m) tall high-cube, as well as 4-foot-3-inch half-height (1.3 m) 20-foot (6.1 m) containers are equally counted as one TEU. Similarly, extra long 45 ft (13.72 m) containers are commonly designated as two TEU, no different than standard 40 feet (12.19 m) long units. Two TEU are equivalent to one forty-foot equivalent unit (FEU).In 2014 the global container fleet grew to a volume of 36.6 million TEU, based on Drewry Shipping Consultants' Container Census.Moreover, in 2014 for the first time in history 40-foot High cube containers accounted for the majority of boxes in service, measured in TEU.Manufacturing prices for regular, dry freight containers are typically in the range of $1750—$2000 U.S. per CEU (container equivalent unit), and about 90% of the world's containers are made in China.The average age of the global container fleet was a little over 5 years from end 1994 to end 2009, meaning containers remain in shipping use for well over 10 years.

 

 

2.type

 

Other than the standard, general purpose container, many variations exist for use with different cargoes. The most prominent of these are refrigerated containers (a.k.a. reefers) for perishable goods, that make up six percent of the world's shipping boxes. And tanks in a frame, for bulk liquids, account for another 0.75% of the global container fleet.

Although these variations are not of the standard type, they mostly are ISO standard containers – in fact the ISO 6346standard classifies a broad spectrum of container types in great detail. Aside from different size options, the most important container types are:

  • General-purpose dry vans, for boxes, cartons, cases, sacks, bales, pallets, drums, etc., Special interior layouts are known, such as:
      • rolling-floor containers, for difficult-to-handle cargo
      • garmentainers, for shipping garments on hangers (GOH)
  • Ventilated containers. Essentially dry vans, but either passively or actively ventilated. For instance for organic products requiring ventilation
  • Temperature controlled – either insulated, refrigerated, and/or heated containers, for perishable goods
  • Tank containers, for liquids or gases. Frequently these are dangerous goods, and in the case of gases one shipping unit may contain multiple gas bottles
  • Bulk containers (sometimes bulktainers), either closed models with roof-lids, or hard or soft open-top units for top loading, for instance for bulk minerals. Containerized coal carriers and "bin-liners" (containers designed for the efficient road and rail transportation of rubbish from cities to recycling and dump sites) are used in Europe.
  • Open-top and open-side containers, for instance for easy loading of heavy machinery or oversize pallets. Crane systems can be used to load and unload crates without having to disassemble the container itself.Open sides are also used for ventilating hardy perishables like apples or potatoes.
  • Platform based containers such as:
  • flat-rack and bolster containers, for barrels, drums, crates, and any heavy or bulky out-of-gauge cargo, like machinery, semi-finished goods or processed timber. Empty flat-racks can either be stacked or shipped sideways in another ISO container
  • collapsible containers, ranging from flushfolding flat-racks to fully closed ISO and CSC certified units with roof and walls when erected.

Containers for Offshore use have a few different features, like pad eyes, and must meet additional strength and design requirements, standards and certification, such as the DNV2.7-1 by Det Norske Veritas and the European standard EN12079: Offshore Containers and Associated Lifting Sets.

A multitude of equipment, such as generators, has been installed in containers of different types to simplify logistics – see containerized equipment for more details.

Swap body units usually have the same bottom corner fixtures as intermodal containers, and often have folding legs under their frame so that they can be moved between trucks without using a crane. However they frequently don't have the upper corner fittings of ISO containers, and are not stackable, nor can they be lifted and handled by the usual equipment like reach-stackers or straddle-carriers. They are generally more expensive to procure.

 

conditionnew
colorroptional
volumn76cbm
type40FT
internal dimension12032X2352X2698mm
external dimension12032X2352X2385mm
certificateISO
feet40

 

Hot Products

100m3/h Low Consumption / High Capacity Hydrogen Generator Plant 99.99% Purity Description: 1.It ...
DNV Certificate 39.90CBM 20ft Container Red color Corten-A Material New Condition 1.introduction ...
HDZK-600/60 1.8KW LNG Low Temperature Thermal Insulation Gas Cylinder Vacuum Detecting Equipment 1...
0.75KW Power Grey Color Model HDZK-600/60 LNG Low Temperature Thermal Insulation Gas Cylinder Vacuum ...
3-16KW Industrial Oven 700*700*1500MM 150KG -98KPA-133KPA 220V/380V, 50Hz/60Hz 1.description ...