Hydraulic Common Carbon Hot Rolling Steel Coil Slitting Machine
Thickness 1.2mm -5.0mm
1. Main usage
It is used to slit the steel coil to the rated width. It could cut
different kinds of metal coils with different blades and prepare
the billet for next process ( such as rolling, welding pipe, cold
bending and punching).
2. Technical process ( including the process drawing)
Stuff preparing
—stuff loading—stuff uncoiling—draw pinching-—front loop rack (
loop pit)—transition rolling platform—slitting line main
machine—transition stuff guiding platform(edge wire pit)—edge wire
coiler—back loop splint ( loop pit)—pre-sub/pressing materials
tension damping device—pinching—coiler—unloading—production
packing.
3. Equipment technical parameter confirmation letter
Specification(raw material):
- Applicable materials:Common carbon hot rolling steel coil(such as
Q195,Q215,Q235)
- Quality:domestic/imported certified products steel coil(meet JIS
standard)
- Tensile strength:δb≤500Mpa,yield strength:δs≤250Mpa
- Thickness:1.2mm—5.0mm
- Width:800mm—1500mm
- Inner-diameter:φ500mm – φ760mm
- Out-diameter:≤φ2000mm
- Weight:≤25T
- Products specifications:
- in-diameter:φ610mm
- out-diameter:≤φ2000mm
- coiled product weight:≤25T
- slitting capability: 15 lines(thickness 1.2mm-2.0mm)
12 lines(thickness 2.01mm-3.0mm)
8 lines(thickness 3.01mm-4.0mm)
6 lines(thickness 4.01mm-5.0mm)
Narrowest production: 60mm(thickness 1.2mm-5.0mm
One side sliver width:≥3.0mm(thickness 1.2mm-3.0mm)
≥thickness of the plate(thickness≥3.0mm)
Two sides should have 2 slivers
- Other parameters:
- 1,Slitting speed:about0-60m/min(stepless speed regulation)
- 2,Slitting type :active slitting with tensile shearing
- 3,Power:380V/50Hz/3ph(it could be determined by buyer)
- 4. Config.:electrical
panel
1set
- Main
control panel
1 set
- Assistant
control panel 2 sets
- 5,Production direction:by customer(face to machine)
- left-in and right-out right-in and left out
- 6,Plant area:about 25 meters ×8 meters
- 7,Operator:main skilled operator 1-2persons, assistant 2-3persons
- Note:Specific number of operators depends on
actual situation of customer's
- 8,color:Concave-convex phthalocyanine green
- Remarks: all the above parameters is
primary data only for reference. If buyer has any other
requirement, please contact us to make the best proposal.
4. Equipment configuration
,Equipment composition:
- Stuff stacking rack (each one for left and right side) 1 set
- Hydraulic loading trolley
1set
- hydraulic taper expansion/contraction material hanging uncoiler
1set
- Automatic hydraulic pressure driving feeding
machine
1set
- leading terminal and shoveling terminal
1set
- traction pinch initial correction machine 1set
- steel strip head/tail shearing machine 1set
- front looper pallet rack (looper pit) 1set
- center directing and correcting device 1set
- slitting host
machine
1set
- transitive material guide rack 1set
- sliver rolling machine
2sets
- back looper pallet rack(looper
pit) 1set
- Pre-sub/pressing materials tension damping device 1set
- Hydraulic slitting pressing device 1set
- rolling host
machine
1set
- rolling
support
1set
- Hydraulic unloading trolley 1set
- Hydraulic pneumatic system 1set
- Eclectic controlling system 1set
Other parameters:
Main components drive motor:
Loading
trolley
2.2KW 1set
Uncoiler
4KW
1set
Traction pinch initial correction machine
22KW 1set
Slitting host
machine
90KW
1set
Upper horizontal shaft pressing motor
2.2KW
1set
Sliver rolling machine (one for each
side)
15KW 2sets
Rolling host
machine
200KW 1set
Unloading
trolley
2.2KW 1set
Hydraulic
Station
11KW 1set
loading machine capacity:about 380KW
Stuff stacking rack
1. It is used to stack stuff in order to leed and transport the
stuff.
2. it is welded by steel plate with V shape
3.Max bearing weight: 25T
Stuff scope: width 900mm-1500mm
Hydraulic pressure loading trolley:
- Function:Working as prepare, transit and hang materials. Lifting
and horizontal movement,which is very convenient to lead the steel
coiler to collapsible drum coiler, using hydraulic cylinder to
lift,using cycloid reducer to horizontal movement;
- structure:welded by steel plate and profile steel
- Max weight load:25ton
- Walking motor:BWED32-121-2.2KW(WUXI)
- Hydraulic taper expansion/contraction material hanging
uncoiler:
- function:It adopts taper 2 ways fixing structure with mechanical
dampling structure to control tension uncoiling ,feeding materials
steady as the speed of sliting machine.
- structure:Made by uncoil rack and roll drum. uncoil rack is welded
by steel plate and profile steel;Roll drum made by center axis and
sector board.
- Max weight load:25ton
- Adaptive swelling coil inner hole:φ500mm—φ760mm
Automatic hydraulic pressure driving feeding machine,
leading terminal and shoveling terminal:
- function:through automatically feeding materials and working by
hydraulic shoveling terminal,move leading terminal safely, then
send in Traction pinch initial correction machine.
- power:BWED53-253-4KW(WUXI)
structure:Welding by steel plate and profile steel.