Blue Color D130L20-200 Air Diaphragm Pump For Oxygen Plant , Long Life

Blue Color D130L20-200 Air Diaphragm Pump For Oxygen Plant , Long Life
 
 
1. description
 
An air compressor is a device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air). By one of several methods, an air compressor forces more and more air into a storage tank, increasing the pressure. When tank pressure reaches its engineered upper limit the air compressor shuts off. The compressed air, then, is held in the tank until called into use.The energy contained in the compressed air can be used for a variety of applications, utilizing the kinetic energy of the air as it is released and the tank depressurizes. When tank pressure reaches its lower limit, the air compressor turns on again and re-pressurizes the tank.
An air compressor must be differentiated from an air pump which merely pumps air from one context (often the surrounding environment) into another (such as an inflatable mattress, an aquarium, etc.). Air pumps do not contain an air tank for storing pressurized air and are generally much slower, quieter, and less expensive to own and operate than an air compressor.
 
 
2. classification
 
Compressors can be classified according to the pressure delivered:

1. Low-pressure air compressors (LPACs), which have a discharge pressure of 150 psi or less
2. Medium-pressure compressors which have a discharge pressure of 151 psi to 1,000 psi
3. High-pressure air compressors (HPACs), which have a discharge pressure above 1,000 psi^[2]

They can also be classified according to the design and principle of operation:

1. Single-Stage Reciprocating Compressor
2. Two-Stage Reciprocating Compressor
3. Compound Compressor
4. Rotary-screw compressor
5. Rotary Vane Compressor
6. Scroll Compressor
7. Turbo compressor
8. Axial Compressor

 
3.  Application standards and specifications 
 

1,material:Refer to international technical requirements and industrial standards

2,compressor:

2．1 JB/T6905-2004

2．2 API618-2007, refinery use reciprocating compressors

2．3 JB/T8935-2014

2．4 GB/T7777-2003

2．5 GB/T4980-2003

2．6 Party B's factory standard

4. Main parameters of compressor

1,compressor

1．1 model: D130L20-200

1．2 type: Two-stage L, water-cooled

1．3 drive mode:crankshaft connecting rod

1．4 Compressing medium: argon

1．5 Volume flow(Nm³/h): 25 50

1．6 inlet pressure MPa(G): 0 0.1

1．7 discharge pressure MPa(G): 20.0

1．8 inlet temperature ℃: ≦30

1．9 discharge temperature ℃: <45(after cooled)

1．10 lubricating-oil temperature ℃: <70

1．11 crankshaft revolutions r/min: 400

1．12 Shaft power kW: <25

1．13 Cooling water consumption m³/h: 2.5

1．14 lubricating-oil brand: L-HM68 antiwear hydraulic oil

1．15 Lubrication method: pressure lubrication

1．16 Oil filling mode: Pressure filling oil

2,motor

2．1 motor model: YX3-225M-6

2．2 motor power (kW): 30

2．3 motor revolution rpm: 980

2．4 voltage V/Hz: 380/50

2．5 Motor protection and insulation requirements: IP44/F

2．6 drive mode: Belt drive

3,machine unit

3.1 size(length*width*height):≈2300×1500×1900 mm

3.2 weight: ≈ 3800kg

3.3 Maximum component weight:<800kg

3.4 maintenance space:The maintenance space around and above the compressor shall not be less than 1.5m.