Active Member
|
[China]
Address: No.488 Guanghua Road ,Songjiang Aera ,Shanghai China .
Contact name:
Airpower Machinery Co.,Ltd. |
|
|
1.25 Inch Plastic Air Blower Pressure Relief Valve For The Emergency Discharge Of Pressurised Fluids
A safety valve is an accessory which protects pressursed equipments from the overtaking of an admitted pressure limit, being therefore, a device for the emergency discharge of pressurised fluids, that enters in action automatically when a set pressure is reached (valve set pressure)
The price is just for RV-01A 0~300BAR
VALVE SETTING PROCEDURE:
Use a manometer / in-line pressure gauge,
1 - Start up the blower.
2 - Gradually close the out-let side till reaching the maximum working point of the blower (mbar),
at this point the valve should complete its opening and keep a constant pressure.
3 - Set the valve by using the ring nut (once you reach the correct position, fasten the ring nut).
ALTERNATIVELY
USE AN AMPEROMETRIC PLIER ,
1 - Start up the blower.
2 - Gradually close the out-let side till reaching the maximum working point of the blower (Amp),
at this point the valve should complete its opening and keep a constant pressure.
3 - Set the valve by using the ring nut (once you reach the correct position, fasten the ring nut).
position, fasten the ring nut).
