Active Member
|
[China]
Address: 3/F,block B, shifeng indusrtial park, gongming north ring avenue, guangming district, shenzhen
Contact name:Echo
Shenzhen Seals Instrumentation Co., Ltd. |
|
|
High precision air leak tester Plastic Pipe Testing Equipment
Leakage of a closed container will inevitably cause the loss of gas quality in the container, and the original pressure in the container will be reduced when used. Therefore, the value of the pressure drop in the container can be measured by the pressure difference air tightness detection method to calculate the actual amount of gas leaked from the container. And compared with the standard parts, greater than the measured as a defective product, less than the measured as a good product, so as to achieve the air tightness test.
Item | Testing Machine |
Test medium | Compressed air or specified medium by customers |
Gas source | 0.4-0.8MPA (clean, dry) |
Power supply | AC220V(±15%),50HZ,ground lead |
Environmental temperature | 0-50℃ |
Environmental humidity | ≤95% (not dew) |
Pressure adjustment range | -20kPa~150kPa |
Number of test ports | 1 |
Status of the tested product | With or without hole, semi finished or finished product |
Pressure mode | Positive and negative pressure |
Pressure adjustment precision | 0.05%F.S |
Measurement range of the senor | -20kPa~150kPa |
Measurement range precision of the senor | 0.02%FS |
Pressure minimum setting unit | 1Pa |
Resolution ratio | 1Pa |
Dimension | 335*305*285 |
Gross weight | 11KG |
