Active Member
|
[China]
Address: Changfeng Filter Element Material Factory, No. 5, Filter Material City, Anping County, Hengshui City, Hebei Province, China
Contact name:Anni
Anping Changfeng filter material factory |
|
|
Filter adhesive is mainly composed of epoxy and hardener. In order to improve some properties, toughening agent, diluent, accelerator, coupling agent and other auxiliary materials can be added to meet different uses. Because the epoxy adhesive bonding strength is high, the versatility is strong, once had “The universal glue”, “The big force glue”said, in aviation, aerospace, automobile, machinery, construction, chemical industry, light industry, electronics, electrical appliances and daily life and other fields have been widely used.The room temperature curing adhesive 8:1 is a special adhesive for filters. The adhesive adopts the latest technological formula and is a green environmental protection product. It is one of the most ideal adhesive varieties in China.
wo-component polyurethane adhesive for machine
component proportion ratio is 100:25
Two-component polyurethane adhesive for machine component proportion ratio is 100:25 | ||
| Material-A | Material-B | |
| Weight | Small barrel :25KG | 6.25KG |
| Big barrel :50KG | 12.5KG | |
| Physical nature | orange-red viscous liquid (color based on your request to configure) | brown-yellow liquid |
| viscosity | 800-1000MPa.S(25°C) | 25-50MPa.S(25°C) |
| density | 1.02g/ml | 1.02g/ml |
| package | Plastic bucket or Tin bucket | Plastic bucket ,Tin bucket, Plastic pots |
| storage | 1. Material-A and material-B can store up 3-6 months. | |
| 2. To appropriate indoor storage above 15°C | ||
Appearance: white viscous liquid
Viscosity: 30-45kpa.s
Adhesive strength: initial tack strength 20-21KN/cm-1
Peel strength: 40-48KN/cm-1 High temperature 90 degrees
Celsius, low temperature -35 degrees Celsius, immersion in oil for
192 hours, high oil temperature resistance test, no shrinkage
cracking and degumming.
The room temperature adhesive is suitable for paper filter elements used in internal combustion engines such as automobiles and tractors, and for bonding paper to iron plates or plastics.
1.The special adhesive for two-component room temperature curing filter element has good adhesion to metal paper, etc., impact resistance, peel resistance and vibration fatigue resistance, as well as good wear resistance and oil resistance.
2. Excellent performance. It has excellent oil resistance, high and low temperature alternating performance, and strong tensile and shear strength.
3. Small dosage, fast drying and wide application.
4. Adhesion is tight, not easy to peel.
The surface of the end cover should be cleaned to remove oil and dust, and dry thoroughly. There should be no foreign matter such as oil or water on the surface, otherwise it will affect the bonding strength.Before ingredients, stir or invert component A in the bucket, mix components A and B in a ratio of 8:1, and stir well. Inject an appropriate amount of adhesive into the end cap, and leave it for a while, so that the surface of the adhesive is evenly coated on each part of the end cap. Insert the filter paper (or center tube) into the end cap, check the surfaces of the two glue joints, make sure that they are in complete contact, and put a little pressure on the top to stand.After curing for about 1 hour, turn it over and glue it with the other end cover. After 24 hours, it can be completely dried before packaging. It can be used after 5 days.
1.Q:Can you provide free samples?
A:Sorry, Free samples are not available. But after you place the
order, samples cost would be return. Which is "FREE" in some way.
2.Q:Can we have the company LOGO to be printed on the products?
A:Of course. Private Label is absolutely welcome.
3. Q: Can you give me a discount price?
A: It is depending on the volume. The larger the volume is, the
more discount you can enjoy.
4.Q:How do you guarantee your quality ?
A: Our workers and technical employees are with many years
experiences to ensure the products are good. After production
finished,check will be made by quality inspector.
5. Q:How can you guarantee the quality of mass production is same
with the sample sent to me before?
A: Our warehouse staff will leave another same sample in our
company, with your company name marked on it, which our production
will be based on.
6. Q: How can you deal with quality issues that customers feedback
after receiving the goods?
A: We will follow below steps to solve the quality issues the may
occur.
1) Customers take photos of unqualified goods and then our sales
staff will send them to Quality Department to verify.
2) If the issue is confirmed, our sales staff will explain the root
cause and take corrective actions in coming orders.
