|
[China]
Trade Verify
Address: 12# Fulong Road,Qisha Ind. Zone, Shatian Town,Dongguan, Guangdong, China
Contact name:Shana Chen
Yingwei Lighting Accessory Co.,Ltd. |
|
Verified Suppliers
|
|
|
1.Main Wire Diameter | ∅1.5mm(0.06”) |
| 2.Construction | 1*7,7X7,1*19,7*19 etc |
| 3.Material | Stainless steel / Copper / Galvanized |
| 4.MOQ | 1000pcs |
| 5.Length | 1500mm, as the requirement |
| 6.Type | Single leg |
| 7.Surface treatment | Chrome, Nickel, Black, White, and Silver |
| 8.End parts of fittings | Eyelets terminals Screws Clips Hooks All kinds of grippers Ceiling attachment locking screws A large selection of end fittings, including eye bolts, links, springs, hooks, thimble, clips, stops, ball, ball shanks, sleeve, stamped eye, handles, etc |
| 9.Lead time | 10-15 workdays if there were enough material in stock |
| 10.Sample | Free sample available if all of the dimensions same as our existing one |
1. Our adjustable connectors easily adapt to the most common applications on the market, providing a suspension system that is easy to install and almost invisible when it is set up. If you have a project that involves unusually sloped, curved, or high ceilings, our track suspension systems may be the solution for you. It is affordable, flexible, and easy to install.
2. Insert the cable into the plunger and slide the gripper to the desired position. Where it stops it locks.
3. The 3 balls gripping mechanism is spring-loaded and allows the gripper to move freely up the cable. It cannot move down unless the plunger is depressed. While there is no weight at all on the gripper, the plunger cannot be depressed
Complementary - aesthetic design.
Easy installation that does not require a professional.
Can be pre-installed to channel using pre-fitted
washer/nut or using retention clip reducing time working at height.
No tools needed to adjust cable length, up or down, down or up – as
often as you like.
* This cable gripper has a clutch fitting allowing for infinite cable adjustments.
* To release the cable from the clutch simply push on the nose piece and the cable will release.
* Once the desired length is achieved simply trim excess cable. The excess cable will present from an opening at the side of the fitting.
* Promotional displays (hanging of signs)
* Display cases (lid restraint, shelf support)
* Retail Security (security cable for electronics, clothes, expensive manuals, etc.)
* Lawn and garden equipment (security lanyards for release pins, lid restraints)
* Can be used as a Ceiling Cable to hold signs from above, or lower in the store horizontally as a Sign Holder or Product Merchandising Cable
* Available in custom sizes and put-ups
