Brass Wire Rope Ceiling Attachment Parts Hemispherical With Groove YW86248

Brass Wire Rope Ceiling Attachment Parts Hemispherical With Groove YW86248

Description:

1. On a drywall or wood ceiling, simply use an anchor (drywall) or screw to install part one of the connector. Then put the gridlock cable through the second part of the connector. The "stop" on the connector will stop the wire from falling out.

2. Screw this second part of the connector to the first part already installed in the ceiling.

3. Now you are ready to install the slider to the wire and hang your light fixtures.

Designed for use with cables between 1.2mm and 2mm diameter. Unscrew the threaded base and fit stop to the inside of the dome fitting. Stops can be fitted in our factory or on-site by using Crimp Tool. The base is tapped M6 to secure to surfaces.

These holders are designed to be used with 7x7 and 7x19 construction. They are NOT recommended for use with a 1x19 wire cable as the cable tends to slip.

Application:

* The dome-shaped ceiling attachment coupler provides the perfect solution for hanging objects from a single stationary location.

* The Ceiling Attachment kit can be used to hang signs, banners and display items.

* Once installed objects can easily be adjusted vertically using cable hooks, gripper hooks, and side clamps.

* In addition to signs and banners, the ceiling-attachment set is ideal for hanging art, chandeliers, collectibles, cookware, panels, planters, and partitions.

Advantages:

* Fast and easy to suspend lighting fixtures during the installation;

* Designed for the suspension of surface light fittings, suitable for use with a large range of commercial lighting;

* No tools needed to adjust cable length, up or down, down or up – as often as you like;

* Time-Saving: Allows quick installation and instant adjustment;

* The finest way to suspend lighting fixtures available.

Materials & Finishes

Ceiling Attachments are made of nickel / Chrome-plated brass with a few exceptions.

Internal mechanisms are comprised of brass and stainless steel.

Satin-chromed and other finishes are available upon request.

How To Installation:

1: Insert the cable into Gripper hooks.
2: Pass cable through or around the anchor point.
3: Insert cable back into Looping Gripper.
ADJUSTMENT: Remove load from cable, depress plunger & adjust cable height.
Note: Gripper hook must maintain a minimum 500 distance from all suspended objects or support structures.

Quality Control

As all manufacturers and installers know, suspending objects safely over people’s heads is their first and most critical responsibility.

Safety is our number one concern. Each and every gripper is a precision-built machine.