Shenzhen Aidacom Cleantech Co., Ltd. |
|
UK Earth bonding Plug with 1 x 10mm stud
Material: ABS
Snap Type: 1 x 10mm stud
Color: Yellow
Reisstor: 1 M
Certificate: CE
Features:
The plug fits directly in to the mains supply socket, connecting with only the earth conductor. Live and
Neutral pins have been molded in insulating plastic, fitting into the supply socket but completely dormant.
At the front of the plug are connectors linked via 1M Ohm resistors to the earth pin, inside the plug. The connectors
offer a link to ground for connecting cords from the EPA.
The1M Ohm resistor to each connector offer protection in the event the workstation becomes live. That protection
would limit the current to less than 0.3mA at 240 volts. Should the fault current continue the resistor will open circuit.
Insert the plug into the supply socket making sure it is fully home, then connect the various elements of the EPA...
such as wrist strap cord, bench or floor matting connection cords. This ensures that the EPA is at the same earth potential.
As generally the workstation has more than one plug socket it is possible to use more than one EBP if more connections
are required.
Warning the plug must only be used for ESD control purposes.
The EBP is sealed and cannot be opened for repair. To test each connection use a multi-meter from the connector to the earth pin. The reading should be between 0.9 and 1.1M Ohms. As each connection
point has its own 1M Ohm resistor, the resistance between two connectors should be approximately 2M Ohms. All EBP’s are tested and then packed in a bag.
EP1240-1 | U.K. EBP with 1 x 10mm stud |
EP1240-2 | U.K. EBP with 1 x 10mm Stud with 1M Resistor |
EP1240-3 | U.K. EBP with 3 x 10mm stud, 1M Resistor |
EP1240-4 | U.K. EBP with 3x4mm Banana sockets, 1M Resistor |
EP1240-5 | U.K. EBP with 1 x 10mm stud+2x4mm Banana sockets, 1M Resistor |
EP1240-6 | U.K. EBP with 2 x 10mm stud and 1 x M5 Posts, 1M Resistor |
EP1240-7 | U.K. EBP wih 1 x 10mm stud and 2 x 4mm male stud, 1M Resistor |
EP1240-11 | EU EBP with 1 x 10mm stud |
EP1240-12 | EU EBP with 1 x 10mm Stud, 1M Resistor |
EP1240-13 | EU EBP with 3 x 10mm stud, 1M Resistor |
EP1240-14 | EU EBP with 3 x 4mm Banana sockets, 1M Resistor |
EP1240-15 | EU EBP with 1 x 10mm stud+2x4mm Banana sockets, 1M Resistor |
EP1240-16 | EU EBP with 2 x 10mm stud+1 x M5 Posts, 1M Resistor |
EP1240-17 | EU EBP wih 1 x 10mm stud and 2 x 4mm Male stud, 1M Resistor |
EP1240-21 | Swizerland EBP with 3 x 10mm stud, 1M Resistor |
EP1240-22 | U.S EBP With two 5mm Banana Sockets,50K Resistor, Need Aidacom Cable to fit the Plug |
EP1240-31 | ESD Earth Facility , with test point 4mm socket and 2m long Copper tape |
EP1240-32 | ESD Earth Facility , M5 Bolt with knurled threaded ,2m long Copper tape |
EP1240-41 | 2 x 10 mm snap; 1 x 4 mm banana plug socket , 1 MOhm resistor |
EP1240-42 | 3 x 4 mm banana plug socket , 1 MOhm resistor |
EP1240-43 | 3 x 10 mm snap, 1 MOhm resistor |
EP1240-51 | ESD Box EBP with 3 x 10mm stud, 1M Resistor |
EP1240-52 | ESD Box EBP with 2 x 10mm stud+1x4mm Banana sockets, 1M Resistor |
EP1240-53 | ESD Box EBP with 1 x 10mm stud+2x4mm Banana sockets, 1M Resistor |
EP1240-61 | ESD Male EBP with 1 x 10mm stud, 1M Resistor |
EP1240-62 | ESD Male EBP with 1 x 4mm Banana Socket, 1M Resistor |
1. All the goods are inspected before shipment.We could accept to return the goods
if there is quality problem and we will shoulder the shipping
and handling charges
2.If you are not satisfied with the goods,but there is not quality problem,you still can exchange the items in one week and contact
us within 24 hours of receipt of your orders.In that case,the shipping and handling charges is not refundable and customer should
be responsible for the charges of returning .
3. Sincerely Note: For the mininum lose between customer and us, please contact our customer service before return back the
products, we will try our best to solve the problem for you.
4. We could accept to return the goods if they can not work in warranty time.
For New Customers
1. Offer will be provided in 2 hours from 9:00 A.M. To 23:00 P.M.
2. Free samples could be provided for new customers.
3. 3% commission will be refund in second order if order
Quantity is more than our MOQ
For VIP Customers
1. 5 times Free samples including the freight per year.
2. 5% sales commission will be refund in the first order in the beginning of the new year.
3. Order will be executed immediately after P.O. , no need down payment.
4. All your business such as offer,sample,order,shipment will be handled with priority.
5. A working place will be provided free for 1 month if you come to China.
6.One days translations service could be provided if you visited in China.
7. Could help to inspect,collect and store goods from your other supplier in China.
8. For more VIP service,Please contact us
Contact us to know how to be our VIP customer.......
Q1 | How fast can I get the quotation? |
A | We usually make an offer within 1 hour after we get your inquiry. It takes 9 hours if your inquiry hit our email at our free time. |
Q2 | How can I get a sample to check your quality? |
A | After price confirmation, you can require for samples to check our quality. |
If our samples can not be provided free, we will charge for the sample cost..But the sample cost can be refundable after order confirmation when your quantity of the order is more than the MOQ. | |
Q3 | What about the leadtime of sample? |
A | It takes 2-3 days after your samples confirmation |
Q4 | Can you do the design for us? |
A | Yes. We have a professional team having rich experience in designing and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect fact. It does not matter if you do not have someone to complete files. Send us high resolution images, your Logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation. |
Q5 | What about the lead time for mass production? |
A | Honestly, it depends on the order quantity and the season you place the order. The lead time of 500pcs is about 8 working days. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country. |
Q6 | What is your terms of delivery? |
A | We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you. |
Q7 | What payment terms and mothod can you accept? |
A | Payment Terms:20% down payment and balance before shipment. Payment Method:Wire Transfer,Western Union,Paypal, L/C,Cash |
We,Aidacom, established in 2002, rooted from a small plant in 1999, is located in Shenzhen,south of China .We are specialized in manufacturing ESD Gloves,ESD Heel/Wrist Strap,ESD Garment,ESD Chairs,ESD box, ESD bags,ESD Sticky mat,ESD Mat and ESD Tapes. And also we are a leading distributor with 10 years experience for all ESD& Cleanroom products such as ESD Tools , ESD Packing ,Clean room Consumables,Equipments,Solsering stations and Testers. Our customers are involved in various sectors:Micro electronics, Automotive ,Electronics, Medical, Clean Room.Our Customer base includes. LG Electronics, Flextronics, Foxconn, Panasonic,Alcatel and so on.We are identified as one of the most trustworthy suppliers of the above Product ...