Shenzhen Firecore Technology Co., Ltd. |
Verified Suppliers
|
|
High definition camera for passenger cars indoor hemispherical infrared night vision 24V low power consumption
BSD camera, car side view camera, car left and right cameras
4 . Installation of sound and light alarms
BSD cameras and sound and light alarms can monitor blind spots and
alert pedestrians when approaching .
1) Detecting pedestrians or bicycles in blind spots
a . The longitudinal distance of pedestrians or bicycles in the
detection area within the screen
b . The lateral distance of pedestrians or bicycles in the
detection area within the screen
c . Pedestrians or bicycles entering the detection screen from the
rear
d . Pedestrians or bicycles entering the detection screen from the
side
e . Pedestrians or bicycles entering the detection screen head - on
2) After detecting that pedestrians are too
close sound and light alarms will be broadcasted
to remind drivers and pedestrians to pay attention to safety
3) The BSD camera is a starlight camera displaying in
full color at night .
a . Lateral BSD cameras are generally used on medium to large
vehicle models with large blind spots such as dump
trucks large trucks and mixer
trucks . When installing the camera should
be installed at the edge of the blind spot that is closest to the
back (lateral BSD is recommended to be installed at the right
rear) . In order to better detect pedestrians in the blind
spot the installation position should be about 1.8
meters above the ground and the camera angle should be
adjusted to slightly face outward and downward so that the
image can cover most of the blind spot and the vehicle body
accounts for less than 25% of the image .
b . The forward facing BSD camera is also applied to large
vehicles and is generally installed on the cover above the
driver's windshield with the installation position
as centered as possible .
The extension cable of the camera should be routed from below the
vehicle and fixed through the frame itself without
interfering with the truck bucket or mixing
tank to avoid affecting the wire during unloading
or mixing .
c . The sound and light alarm should be installed outside the
passenger seat near the car window, so that the
voice broadcast can be clearly received by
pedestrians while also allowing the driver to hear
the alarm sound .