Shenzhen Firecore Technology Co., Ltd. |
Verified Suppliers
|
|
Car reversing camera simulates high-definition rear view wide-angle monitoring, 12/24V waterproof camera
Working principle of folding and editing this paragraph
The camera power is connected to the reverse taillights
. When reverse gear is engaged the camera
synchronizes power supply and enters the working state
. The collected video information is sent to the
wireless receiver located at the front of the car through the
wireless transmitter . The receiver transmits the
video information to the GPS navigator through the AV IN
interface . This way when
the receiver receives the signal regardless
of whether the Gps navigator is in any operating interface
We will prioritize providing LCD screens for
reverse image videos .
The difference between the use of car mounted cameras car mounted displays and car mounted DVD navigation systems as well as portable GPS navigation systems is that when using car mounted displays the car mounted displays do not need to be turned on . As long as reverse gear is engaged the car mounted displays will automatically display the image of the car mounted camera The car DVD navigation can only display the car camera image under normal startup conditions When using a portable GPS navigation system it is necessary to turn on the navigation system before displaying the car camera image
Car mounted cameras are the foundation for implementing numerous warning and recognition ADAS functions . Among the many ADAS functions the visual image processing system is relatively basic and the camera is the input of the visual image processing system . Therefore in car cameras are essential for intelligent driving
Whether a camera performs well or not depends on 70% of its optical parameters determined by the lens. Although it is not as expensive as COMS chips in terms of unit price performance is very importan
signal pattern | NTSC PAL |
camera lens | 2. 1 2. 8 3. 6 |
pixel | 200/1080P 130/960P |
Low illumination | 0.0001 Iux-O Lux Infrared start |
synchronous mode | Internal synchronization |
Signal to Noise Ratio | >=46dB |
dynamic range | 72d8(HDR) |
Electronic shutter | 1/60 (PAL. 1/50)-1/100000s |
automatic balancing | open (ON/OFF) |
gain control | open (ON/OFF) |
Back light supplement | open(HLC High brightness/BLC) |
Auto Iris | image(Video/DC) |
power supply | DC12V90mA(When infrared is turned on250mA) |
weight | 0. 00g |
Shell material | Aluminum alloy/stainless steel |
interface | AV/USB/BNC/Aircraft Head interface |
Pixel CMOS Resolutio 5Lens type 1/4CMOS Operating voltage : 5V DC Working Current 50(infrared lamp on 100MA) Minimum Illumination 1 lux White balance automatic Lens 2.8 MM 850 IR (optional) Exposure auto Angle of view 100 degrees - LRB-lens configuration) night vision parameter 8 lights Night vision turns on 5Lux Night - vision image black - and - white image daytime color |