Shenzhen Firecore Technology Co., Ltd. |
Verified Suppliers
|
|
Starlight level 1080p monitoring camera ceiling installation with 24V wide voltage
Note : When using the headlights press the
dual flashing lights to trigger the main unit turn
off the dual flashing lights at any time and the
monitoring system enters basic mode .
Description of surveillance footage
(1) Startup of surveillance video : When the car
starts the recording system automatically records
and saves in a loop . The recording format is AVI and each
video segment is 3 minutes long .
After parking when the vehicle is hit by external
forces and vibrates the vibration sensor installed
in the car immediately triggers the monitoring system host to
work quickly recording real - time high -
definition monitoring footage and recording the real - time on -
site situation of the car being hit.
Video files can be played online or inserted onto a computer by
unplugging them .
The recording screen is in a " field " shaped four screen mode to
meet the recording needs of the camera images in four directions
. Real time information is overlaid in the upper left corner
to grasp the specific recording time at the time of the incident .
(2) Description of monitoring and recording buttons
(3) Monitoring and recording button
SD - SD card supports a maximum capacity of 32GB
Playback - (long press) to enter/exit playback mode
Delete - (long press) In playback
mode you can delete the current video file
Time - (Long press) In the vehicle monitoring
status the time can be set . If you continue
to long press the [Delete] button you can set the
year month day hour
minute and second separately
Start - In playback mode press the [Start] button
to start playing the current recording file
In the vehicle monitoring (not recorded) state, press the [Start]
button to start recording
Stop - In recording mode press the [Stop] button
to stop playing
In the vehicle monitoring (recording) state press
the [Stop] button to stop recording
◀ — In playback mode press【 ◀】
Key select the previous recording file
In the time setting state press【 ◀】
Key time set value reduced by "1"
▶ — In playback mode press【 ▶】 Key select
the next recording file
In the time setting state press【 ▶】 Key
increase the time setting value by "l"