Home Companies SHENZHEN I-LIKE FINE CHEMICAL CO., LTD

Dark Green Color Fast Drying Spray Paint For Surface - Treated Wood

SHENZHEN I-LIKE FINE CHEMICAL CO., LTD

Contact Us

[China] country

Trade Verify

Address: 10C, Boxing Building, Qingshuihe 1st Rd., Luohu Dist., Shenzhen, Guangdong, China (Mainland)

Contact name:Eric Johnken

Inquir Now

SHENZHEN I-LIKE FINE CHEMICAL CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Dark Green Color Fast Drying Spray Paint For Surface - Treated Wood

Country/Region china
City & Province shenzhen guangdong
Categories Paint & Coatings
InquireNow

Product Details

Dark Green Color Fast Drying Spray Paint For Surface - Treated Wood

 

BrandAEROPAK
Product namegraffiti paint
Filled ML400ml
Color dark green
Item No.APK-6601-4
 Application Method Spray

 

Features:

1. Thermal-plastic acrylic paint;

2. Excellent coverage and adhesion;;

3. Hard wearing;

4. Quick drying;

5. Low smell;

6. Many of optional colors or customized colors.

 

Application:

graffiti spray paint is Widely used in advertising industry, surface-treated wood, metal, ABS plastic, glass and automotive, motorcycle surface decoration and protection.

 

 

 

Precautions:

 

1. Content under pressure. Keep away from heat, flame, spark and other source of ignition.
2. Do not spray on objects with direct contact of food.
3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment.
4. Avoid applying the lacquer on a rainy or freezing day.
5. Do not clash, puncture, or incinerate the can, even after use.
6. Store in a cool, dry place (
45℃); Avoid direct sunlight.
7. Keep out of the reach of children.

 

 

Package:

 

Item No.:

ID-217

Can Size:

∮65mmx 158mm H

Package:

400ml x 12pcs/ctn

Carton Size:

275x205x205 mm

20ftContainer Loading

2500 cartons

 

PREPARATION

For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.

APPLICATION

IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.

CLEAN UP

Clean any over spray with mineral turps or general-purpose thinners. For better long term storage, turn can upside down and spray until no paint is coming out.

CORRECT DISPOSAL

Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.

PRECAUTIONS

  • Do not use near fire or naked flame.
  • Do not puncture or incinerate even if empty.
  • Keep in a cool place out of direct sunlight.
  • Do not store above 50°C. / 122 F
  • Never spray at eyes or face.

PROPELLANT: HYDROCARBON

SAFETY WARNINGS

Keep out of reach of children
If swallowed seek medical advice immediately.

Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.

 

 

Hot Products

Heat Resistance Acrylic Spray Paint Fireproof For Surface Finishing Heat Resistance Acrylic Spray ...
Odourless Aerosol Spray Paint 10oz Rich Metallic Finish Interior Exterior Features Metallic spray ...
Aeopak All Purpose Aerosol Spray Paint Quick Drying With Excellent Adhesive Features Gloss finish ...
High Glossy Aerosol Spray Paint , Wide Coverage Automotive Aerosol Paint - 100% Pure Acrylic, Fast ...
Good Adhesiveness High Temp Spray Paint For Stacks / Mufflers / Boilers - Corrosion and Heat ...
100 % Pure Acrylic Spray Paint High Gloss For Automotive & Motorcycle - 100% Pure Acrylic, Fast ...