ADO ELECTRONICS LIMITED |
|
Model | AD-PAL6*6-48W | AD-PAL6*6-36W |
Power | 48W | 36W |
Input Voltage | AC-85-265V | AC-85-265V |
LED Chip Brand | Epistar | Epistar |
LED Chip Quantity | SMD2835*240pcs | SMD2835*180pcs |
CCT | WW NW WW | WW NW WW |
Lumen | 3840LM | 2880LM |
Size | 600mm*600*11mm | 600mm*600*11mm |
CRI | 80Ra | 80Ra |
PF | 0.9 | 0.9 |
2. Specification:
Model: AD-PAL6*6-48W
Size:600mm*600*11mm
Input Voltage:AC85V-265V
Watt: 48W
CCT: 2800-6500K
Beam angle:120°
Lumen: 3840Lm
Lumen effciency:80LM/W
CRI>80Ra
LED Brand: Taiwan Epistar
LED Type: SMD2835*240pcs
Material:Aluminum
Life Span:30000 hours
Warranty: 3 years
IP Grade: IP44
LGP: PMMA
Fixture color: sliver / white
Working Temperature(℃): -20 - +40
Ambient Temperature: less than 60°C
LED Driver: Waterproof wide voltage IC isolated constant current
PFC: 0.9
3. How to identify the quality of Flat LED panel lights?
Compared with other lighting products, LED panel lights have
outstanding advantages: ultra-thin, super-bright,
ultra-energy-saving, long-life, and green. However, the quality of
flat LED panel lights varies greatly. Consumers do not know how to
choose?
In view of the vicious competition in the market for flat panel
lamp prices, a large number of unqualified products went on the
market (professionals call it (bad goods, bad goods, bad goods))
and have violated the real value of LED energy saving, long life,
and environmental protection, and have violated the LED. The
application of technology to the significance of the integrated
ceiling area has seriously affected the healthy development of
integrated ceiling LED panel lights. As a manufacturer of LED panel
lights, this responsibility is to introduce and explain how to
select LED panel lights or identify the quality of LED panel
lights.
First, look at the overall "power factor of lighting": low power factor, indicating that the use of power supply,
circuit design is not good, will greatly reduce the service life of
the lamp! Power factor is low, the use of a good lamp lamp life
will not be long . The power factor level can be detected with the
"Power Factor Meter"! The power factor of the general export LED
flat panel lamp is required to reach 0.85 or more. If the power
factor is lower than 0.5, it should be said that the product is not
only short-lived, but also the actual power consumption is about
twice as high as the nominal value. That is to say, compared with
the conventional energy-saving lamps, it does not save power at
all! This is why LED panel lights need to be equipped with
high-quality, high-efficiency drive power! There is no "power
factor meter" to detect LED lighting power factor consumers, there
is a way to use the "amperometer" to detect two Similar products
with the same nominal power, the greater the current and the
greater the current harmonics, indicating that the actual power
consumption is large, and the less power it saves! At the same
time, the current is not stable, which is detrimental to lamp life
and overall lamp life!
Second, look at the "heating conditions of lighting - materials, structures": LED lighting is also very important heat, the same power factor
lighting and the same quality of the lamp, if the heat conditions
are not good, the lamp beads work at high temperatures, light
decline will Large, lighting life will be reduced. The
heat-dissipating materials used mainly include copper, aluminum and
PC. The heat conductivity of copper is better than that of
aluminum. The thermal conductivity of aluminum is better than that
of PC. Nowadays, the heat sink material is generally made of
aluminum, and the best one is aluminum insert, aluminum (aluminum),
(Aluminum extrusion) followed, the worst is cast aluminum, insert
aluminum best cooling effect!
Third, look at the "lamp led chip quality": lamp led chip quality is determined by the chip quality and
packaging technology. The quality of the chip determines the
brightness and light decay of the lamp beads. A good lamp is not
only bright and bright, but also has a low light decay.
Fourth, look at the lighting used to drive the power supply, the power of the service life of the other parts of the lighting,
life expectancy is much shorter, the life of the power supply
affects the overall life of the lighting, lamp beads theoretical
life of 5-10 million hours, and the power supply Lifespan is 0.2 -
30,000 hours. The design and material selection of the power supply
will determine the service life of the power supply. The appearance
of aluminum alloy power supply drive is better than engineering
plastics, first, its good heat dissipation, and second, the
transportation and use of the process can effectively protect the
inside parts are not crushed and loose, reducing the power-driven
failure rate.
Fifth, see the light effect: the same lamp power, the higher the luminous efficiency, the
higher the brightness, the same brightness, the smaller the power
consumption, the more energy-efficient.
Six, look at the power efficiency, the higher the power efficiency
as possible, the higher, indicating that the power consumption of
the power itself is smaller, the greater the power output.