Smd3528 Led Flexible Tape Light , Double Line Led Light Strips For Homes

LED Flexible Strips Light DC24V SMD3014 240LED Double Line LED IP20 15mm

1. Description:

LED strips are not dimmable in the conventional sense. Attempting to vary the brightness of the LEDs by changing the external voltage is impractical. However, they can be dimmed using pulse-width modulation (PWM) dimmers. These rapidly switch the LEDs on and off, typically 20 times per second, by changing the voltage from zero to the expected value as a square wave. The relative width of the on and off portions of the square wave can be varied so that the LEDs are on or off for relatively more or less time, leading to a perceived (and to some extent real, with phosphor-coated LEDs) change in the brightness.

2. Products Specification:

3. Application: 

Strip lights are designed for both indoor and outdoor use depending on whether they’re water resistant. Since the strip is flexible and can be divided at any point between LEDs, it is extremely versatile and can be used in a number of installations. Outside of traditional lighting, strip lighting is extensively used in DIY projects or lighted clothing. The ability to power strip lights off of a USB device or battery pack makes them extremely portable. Examples include: Computer lighting, costume lights, toys, workspace lighting, monitor and display ambient lighting, and alcove lighting.

4. Advantages:

1. Average light distribution,No flickering,No humming

2. High luminous efficieny and color temperature consistency

3. Easy to install with 3M Self-adhesive or matched mounting clip

4. 5 meters per roll packed in anti-static bag

5. Indoor and ourdoor light

6. Dimmable Brightness and changeable color as you like

7. Energy conservation and environmental protection, green products

8. Convenient transportation, not easy broken

9. Life-span: more than 30,000 hours

10. Waterproof performance is strong, suitable for outdoor installation

5. Installation Instruction:

1. Ensure applicable wire is installed between driver, fixture, and any controls in-between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires, and cause fire.
2. Attached wire leads or wire accessories are not rated for in-wall installation unless otherwise noted.
3. Strip light must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty.
4. Ensure wire leads at opposing ends of the tape light are not crossed when the fixture is turned on. It is
acceptable to modify the length or cut off the attached wire leads and DC connections in the field.