3000k E27 Led Candle Bulb , 4.3w Led Candle Lamp 430lm High Color Rendering

 
Dimmable LED Candle Light Bulb Lamp 3000K 4.3W 430LM K5 Crystal CE RoHS
 
1. Description:
 
Ado LED Crystal Candle Light Bulb is using ultra-bright highest level Epistar LED chips with proprietary encapsulation technology, realizing excellent luminance, low brightness decline. Constant-current driver is used to ensure the lamp working with reliability and stability. Our unique design of led crystal candle light obtained Utility Model Patent, there are several different shapes, candle/globe/diamond/bulb, base can be E14 or E27, dimmable is available. It is easy to install, can be widely used in decorative lighting, accent lighting, closet lighting, ceiling lighting, etc. It has EMC,CCC,RoHS,CE certiticates, approved for the global markets. 30000 hours long lifespan with 2 years warranty.
 
 
2. Advantages:
 
1. High effciency: 100LM/W, 2W could compare with 40W incandescent lamp.
2. High color rendering: good color reproduction, clear vision, see the object will not be distorted.
3. Easy to install, transit no broken
4. Energy-saving: Saving 80% power than traditional incandescent lamp
5. High sensitivity, high bright and low consumption.
6. Soft lighting and no glare.
7. CE RoHS EMC LVD certificates with good quality
 
 
3. Specification:
 

 
 
4. Features:
 

 
 
5. Trade Term:
 

 
 
6. Installation manual:
1. Please cut off the main power and moving out the old lamp, meanwhile, please ensure your hands are dry. And there must be a person to watch out in case of any danger.
2. Please install our LED filament bulb, the socket must match bulb's base. If the socket is E27, then make sure you are installing E27 base bulbs, the wrong base and socket will cause short circuit.
3. Please carefully check the installation again to make sure everything is ok, then switch on. Finally bulb will show a nice lighting performance.
 
 
7. Quality control:
 
100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test it’s temperature after 24 hours lighting.Then after it is cool we again test 100% of the lamps to see if it still work well. If defective, we will check the reasons and make sure not to happen again.