Available colors:Stainless Steel;Satin Gold;Polished Chrome;PVD
The perfect match of fingerprint and password; User can unlock with
fingerprint, password, RF card or mechanical key respectively.
Electronic key and mechanical key is operated separately. When the
electronic part of the lock work abnormal, mechanical key can
override to unlock.
High storage capacity; it can save 120 fingerprints, 120 pieces RF
card, one set of password.
The keypad will be locked automatically with 3 times of wrong
password input. To unlock the keypad, no pressing any buttons in 3
seconds or use registered fingerprint can unlock the door.
Moist-proof design: epoxy resin is cover on PCB board to prevent
the circuit on PCB board will be damaged by moist; this feature is
enhancing the protection of PCB board.
Self-management: user could add, update, delete fingerprint and
password; easy to manage.
User-friendly, it doesn’t need to waste too much time to learn and
re-learn the lock operation.
The lock adopts motor mortise with 5 latches and the two layer
structure to strength the mortise.
Antistrike feature: When the door is closed, the antistrike latch
is pressed against the door frame, which prevents the door from
being opened simply by striking.
Antistrike feature: if the latches cannot work by maliciously, i.e.
the lock cannot be antistrike; the alert will cue to user within 5
seconds. It achieves high security.
Close door alert: If the door is not close properly, green light
will flash in 5 seconds and “Do” sound will cue to user to close
the door after 5 seconds.
Lock function: It can be locked by mechanical key or bolt knob. To
unlock, please use mechanical key or electronic key.
Power supply: The energy efficiency IC board is adopted to use in
the lock; it can be operated in ten thousand times by 4 pieces of
1.5V alkaline battery.
The fingerprint, password and card information will not lose when
Low voltage alert will be cued to user to change battery when the
voltage is not sufficient.
When voltage is insufficient for fingerprint to unlock, password
can be used instead. But please change the battery immediately to
maintain the lock in normal operation.
Alert notice: Different cue lighting and sound alert will show when
the lock in operation.
The maximum string of digits for one set password: 11 digits
Fingerprint capacity: 120
RF card capacity: 120 cards
Fingerprint template registration: twice for each fingerprint to
generate a template
Fingerprint update automatically
Fingerprint templates are stored automatically
Fingerprint Verification time <1”
Verification – 1:N
Angle for finger verification: any angle
30 mega pixel CMOS sensor
Fingerprint sensor DPI: 500DPI
The damage resistance of sensor is high, e.g. sensor is not damage
with the impact of 4H pencil 1000 times.
Static consumption <50μA
Dynamic consumption < 200μA
Voltage: 4 pieces of 1.5V alkaline battery, 6V direct current
Battery life cycle: Around 10,000 times
Power supply: 4 pieces of 1.5V AA alkaline battery
Low voltage alert: lower than 4.5V
Activate motor operation: 0.5 seconds
Lead time between lock and unlock: 5 seconds