Home Companies SZ ADE Electronics Co., Ltd

R7F7010333AFP#KA4 Transistor Ic Chip Ic Mcu 32bit 1mb Flash 176lfqfp

Contact Us

[China]

Trade Verify

Address: Room 405, Building A2, Niushang Zhigu, United Industrial Park, Fengtang Avenue, Shenzhen，Guangdong, China. Post code: 518100

Contact name:Amy

SZ ADE Electronics Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

R7F7010333AFP#KA4 Transistor Ic Chip Ic Mcu 32bit 1mb Flash 176lfqfp

Country/Region	china
City & Province	shenzhen guangdong
Categories	Memory Cards

Product Details

R7F7010333AFP#KA4 Transistor Ic Chip Ic Mcu 32bit 1mb Flash 176lfqfp

RH850G3K RH850/F1L Microcontroller IC 32-Bit Single-Core 80MHz 1MB (1M x 8) FLASH 176-LFQFP (24x24)

Specifications of R7F7010333AFP#KA4

TYPE	DESCRIPTION
Category	Integrated Circuits (ICs)
	Embedded
	Microcontrollers
Mfr	Renesas Electronics America Inc
Series	RH850/F1L
Package	Tray
Product Status	Active
Core Processor	RH850G3K
Core Size	32-Bit Single-Core
Speed	80MHz
Connectivity	CANbus, CSI, I²C, LINbus, SPI, UART/USART
Peripherals	DMA, PWM, WDT
Number of I/O	150
Program Memory Size	1MB (1M x 8)
Program Memory Type	FLASH
EEPROM Size	32K x 8
RAM Size	128K x 8
Voltage - Supply (Vcc/Vdd)	3V ~ 5.5V
Data Converters	A/D 28x10b, 32x12b
Oscillator Type	Internal
Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Surface Mount

Features of R7F7010333AFP#KA4

Unconnected CMOS device inputs can be cause of malfunction. If an input pin is unconnected, it is possible that an internal input level may be generated due to noise, etc., causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed high or low by using pull-up or pull-down circuitry. Each unused pin should be connected to power supply or GND via a resistor if there is a possibility that it will be an output pin. All handling related to unused pins must be judged separately for each device and according to related specifications governing the device.

Applications of R7F7010333AFP#KA4

Waveform distortion due to input noise or a reflected wave may cause malfunction. If the input of the CMOS device stays in the area between VIL (MAX) and VIH (MIN) due to noise, etc., the device may malfunction. Take care to prevent chattering noise from entering the device when the input level is fixed, and also in the transition period when the input level passes through the area between VIL (MAX) and VIH (MIN).

Environmental & Export Classifications of R7F7010333AFP#KA4