Home Companies SZ ADE Electronics Co., Ltd

EP2C50F484C7N General Purpose Relays Ic Fpga 294 I/O 484fbga

Contact Us

[China]

Trade Verify

Address: Room 405, Building A2, Niushang Zhigu, United Industrial Park, Fengtang Avenue, Shenzhen，Guangdong, China. Post code: 518100

Contact name:Amy

SZ ADE Electronics Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

EP2C50F484C7N General Purpose Relays Ic Fpga 294 I/O 484fbga

Country/Region	china
City & Province	shenzhen guangdong

Product Details

EP2C50F484C7N General Purpose Relays Ic Fpga 294 I/O 484fbga

Cyclone® II Field Programmable Gate Array (FPGA) IC 294 594432 50528 484-BGA

Specifications of EP2C50F484C7N

TYPE	DESCRIPTION
Category	Integrated Circuits (ICs)
	Embedded
	FPGAs (Field Programmable Gate Array)
Mfr	Intel
Series	Cyclone® II
Package	Tray
Product Status	Active
Digi-Key Programmable	Not Verified
Number of LABs/CLBs	3158
Number of Logic Elements/Cells	50528
Total RAM Bits	594432
Number of I/O	294
Voltage - Supply	1.15V ~ 1.25V
Mounting Type	Surface Mount
Operating Temperature	0°C ~ 85°C (TJ)
Package / Case	484-BGA
Supplier Device Package	484-FBGA (23x23)
Base Product Number	EP2C50

Features of EP2C50F484C7N

■ High-density architecture with 4,608 to 68,416 LEs

● M4K embedded memory blocks

● Up to 1.1 Mbits of RAM available without reducing available logic

● 4,096 memory bits per block (4,608 bits per block including 512 parity bits)

● Variable port configurations of ×1, ×2, ×4, ×8, ×9, ×16, ×18, ×32, and ×36

● True dual-port (one read and one write, two reads, or two writes) operation for ×1, ×2, ×4, ×8, ×9, ×16, and ×18 modes

● Byte enables for data input masking during writes

● Up to 260-MHz operation

■ Embedded multipliers

● Up to 150 18- × 18-bit multipliers are each configurable as two independent 9- × 9-bit multipliers with up to 250-MHzperformance

● Optional input and output registers

■ Advanced I/O support

● High-speed differential I/O standard support, including LVDS, RSDS, mini-LVDS, LVPECL, differential HSTL, and differential SSTL

● Single-ended I/O standard support, including 2.5-V and 1.8-V, SSTL class I and II, 1.8-V and 1.5-V HSTL class I and II, 3.3-V PCI and PCI-X 1.0, 3.3-, 2.5-, 1.8-, and 1.5-V LVCMOS, and 3.3-, 2.5-, and 1.8-V LVTTL

● Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 3.0 compliance for 3.3-V operation at 33 or 66 MHz for 32- or 64-bit interfaces

● PCI Express with an external TI PHY and an Altera PCI Express ×1 Megacore® function

● 133-MHz PCI-X 1.0 specification compatibility

● High-speed external memory support, including DDR, DDR2, and SDR SDRAM, and QDRII SRAM supported by drop in Altera IP MegaCore functions for ease of use

● Three dedicated registers per I/O element (IOE): one input register, one output register, and one output-enable register

● Programmable bus-hold feature

● Programmable output drive strength feature

● Programmable delays from the pin to the IOE or logic array

● I/O bank grouping for unique VCCIO and/or VREF bank settings

● MultiVolt™ I/O standard support for 1.5-, 1.8-, 2.5-, and 3.3-interfaces

● Hot-socketing operation support

● Tri-state with weak pull-up on I/O pins before and during configuration

● Programmable open-drain outputs

● Series on-chip termination support

VCCA & GND of EP2C50F484C7N

■ Use separate VCCA power planes