Active Member
|
[China]
Address: No.188 Chunxu Road ,Economic Development Zon, Kunshan City, Suzhou, Jiangsu Province, China.
Contact name:Roger Ning
SUZHOU FOBERRIA NEW ENERGY TECHNOLOGY CO.,LTD. |
|
|
6v 12ah lead acid battery sealed rechargeable lead acid battery 6v 4ah 20hr For UPS back up power
>Main characteristic
1. Using oxygen recombination technology: maintenance-free;
2. PbCaSn alloy for plate grids: less gassing, less
self-discharging;
3. High quality AGM separator: extend cycle life and prevent micro
short circuit;
4. ABS material: increase the strength of battery container.
(Flame-retardant ABS is optional);
5. High purity raw material: ensure low self discharge rate;
Why UPS use lead-acid batteries?
The reason why lead acid batteries are preferred for UPS applications is the lower cost and relatively lower-tech battery management requirements. Lead acid battery performance degrades for several reasons. In an uninterruptible power supply, the battery set is used in a standby power application.
How long does UPS lead-acid batteries last?
UPS batteries (traditional sealed lead-acid batteries) tend to have either a 5-years or 10-years design life. Some may last for 10-15 years. Yet performance will significantly reduce overtime to a degree where it is not safe to use in a UPS system. So you should figure out its service life instead of design life.
| Battery Model No. | FBR6V4Ah | |
| Nominal Voltage | 6V | |
| Capacity | 20HR(5.25V) | 4Ah |
| (25ºC) | 10HR(5.25V) | 3.8Ah |
| 1HR(4.80V) | 3.6Ah | |
| Dimension | Length | 90±2mm |
| Width | 43±2mm | |
| Height | 112±2mm | |
| Total height | 112±2mm | |
| Approx. Weight | 5.3kg±5% | |
| Terminal type | F2 | |
| Internal resistance | Approx 3mΩ | |
| (Fully charged,25ºC) | ||
| Capacity affected by | 40ºC | 101% |
| Temperature(20HR) | 25ºC | 99% |
| 0ºC | 83% | |
| -15ºC | 62% | |
| Self-discharge(25ºC) | 3month | Remaining Capacity:91% |
| 6month | Remaining Capacity:82% | |
| 12month | Remaining Capacity:65% | |
| Nominal operating temperature | 25ºC±3ºC(77ºF±5ºF) | |
| Operating | Discharge | -15ºC-50ºC(5ºF-122ºF) |
| temperature range | Charge | -10ºC-50ºC(14ºF-122ºF) |
| Storage | -20ºC-50ºC(-4ºF-122ºF) | |
| Float charging voltage (25ºC) | 13.5 to 13.8V Temperature compensation:-18mV/ºC | |
| Cyclic charging voltage (25ºC) | 14.5 to 15V Temperature compensation:-30mV/ºC | |
| Max charging current | 60A | |
| Max discharging current | 1600A(5sec.) | |
| Designed floating life(20ºC) | 10years | |
| Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
| Raw material | Lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
| F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 9.6V | 262 | 202 | 121 | 74.2 | 43.8 | 31.2 | 25.2 | 21.5 | 14.8 | 12.2 | 6.47 |
| 9.9V | 254 | 197 | 118 | 73 | 43.6 | 31 | 25.1 | 21.4 | 14.7 | 12.2 | 6.46 |
| 10.2V | 243 | 190 | 115 | 71.2 | 43.2 | 30.8 | 24.9 | 21.3 | 14.6 | 12.2 | 6.44 |
| 10.5V | 233 | 183 | 112 | 69.7 | 42.6 | 30.6 | 24.7 | 21.1 | 14.5 | 12.1 | 6.4 |
| 10.8V | 220 | 173 | 108 | 67.6 | 41.5 | 29.7 | 24 | 20.5 | 14.1 | 12 | 6.36 |
>Constant Power Discharge Characteristics(Watt,25ºC)
| F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 9.60V | 2825 | 2214 | 1353 | 845 | 508 | 367 | 297 | 255 | 176 | 146 | 77.7 |
| 9.90V | 2741 | 2160 | 1326 | 833 | 505 | 365 | 295 | 253 | 175 | 146 | 77.5 |
| 10.2V | 2628 | 2081 | 1285 | 812 | 500 | 362 | 293 | 251 | 174 | 145 | 77.3 |
| 10.5V | 2514 | 2010 | 1254 | 795 | 493 | 360 | 291 | 250 | 172 | 144 | 76.9 |
| 10.8V | 2373 | 1904 | 1208 | 770 | 480 | 349 | 282 | 242 | 167 | 143 | 76.3 |
