Active Member
|
[China]
Address: 802 Building 11 No.518 Xinzhuan Road,Xinqiao Town,Songjiang Dist,Shanghai,China
Contact name:Rita
Shanghai Junbond Building Material CO.LTD |
|
|
Aquarium mate waterproof fungicide no harm fish silicone sealant
| Product data................................................................................................................................................................................................................. |
| Specific gravity,g/cm3 | 0.98 |
| Surface dry time,min | ≤10 |
| Extrusion rate,g/min | 260 |
| Flowing,mm | 0 |
| Tensile Strength,MPa | 2.0 |
| Product information....................................................................................................................................................................................................... |
Description
we has one of the best selections of Aquamate Sealant online and all below the standard RRP.
Not only is Aqua Mate high modulus it is also a reactive curing silicone sealant specifically formulated for fish tank/aquarium manufacture. This means that it remains permanently flexible and forms a watertight seal against most surfaces with a low dirt accumulation.
Not only will the waterproof seal withstand continuous water immersion over a long period of time, it is also free from fungicide and solvents, so it won’t harm fish when it’s cured.
Other benefits of Aquamate sealant include:
Fast curing formula gives extremely high early strengths and is tack free in one hour
Extremely low dirt pickup
If you’re applying Aquamate sealant to your fish tank, we recommend ensuring all surfaces are dry, clean and free from any flaky surface coatings. If you have any leftover sealant or mastic joints on your fish tank, make sure to remove before you apply your new sealant.
Read our technical data and application specs below for more information.
Technical Data & Application
Areas For Use
All sealing applications in aquaria.
Sealing of pond liners and all supply/drainage piping.
Limitations
On highly porous surfaces priming is advised.
Not for use on substrates that may bleed oils, solvent or plasticisers.
As pond liner materials vary in quality, always test a small area first for adhesion.
Always wash out ponds and aquaria after use to remove residual acetic acid. Test pH before use.
Allow sealant to fully cure before moving/filling with water.
Surface Preparation
All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. All glass must be cleaned prior to use.
Application
The surfaces to be must be clean, dry and free from dust, grease and other contaminants. Priming is generally not required. Glass must be toughened or laminated. Do not use tempered glass (shattering risk). The following guide is useful in choosing the required glass thickness.
Curing Times
Skin Formation: 15 mins @ 23°C
Through Cure: 3mm per 24 hours
Storage
Store in cool dry conditions between + 5°C and 25°C.
Shelf Life
24 months from date of manufacture in original unopened containers
| FAQ................................................................................................................................................................................................................................................................. |
Q: How can i get the price of silicone sealant?
A: We usually quote within 24 hours after we get your
inquiry(Except weekend and holidays). If you are very urgent to get
the price, please email us or contact us in other ways so that we
can offer you a quote.
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us.
Q: What is your lead time?
A: It depends on the order quantity and the season you place the
order.Usually we can ship within 7-15 days for small quantity,and
about 30 days for large quantity.
Q: What is your payment term?
A: T/T,Western Union,L/C,and Paypal.This is negotiable.
Q: What is the shipping method of silicone sealant?
A: It could be shipped by sea,by air or by
express(EMS,UPS,DHL,TNT,FEDEX and ect).Please confirm with us
before placing orders.
Q: Can you provide OEM service?.
A: Yes,we can produce under your own brandname.
Q: How can you guarantee the quality?
A: We have rigorous quality test system, from raw materials to
finished products, the materials must be checked and signed by QC
people.
Q. Do you have MOQ of silicone sealant?
A:Yes, Generally, OEM MOQ is 3000pcs, Junbond silicone sealant
500pcs will be ok.
Q:Can I visit to your factory?
A:Welcome. Please let me know your trip plan, we would like pick
you up and book hotel for you.
| Display............................................................................................................................................................................................................................................................ |
