Active Member
|
[China]
Address: No. 27-28, Building 58, Hedong Road, Economic Development Zone, Wenzhou, Zhejiang, China
Contact name:Sophia Hsu
Wenzhou Ace Machienry Co., LTD |
|
|
Working Principle for Screw Pump | |||
1). G series screw pump (slurry pump,mono screw pumps ) is
progressive cavity pumps with the merits of compact
structure,stable to flow,easy maintain,small pressure fluctuation
and strong self-priming ability. | |||
2). Pump has metal lined with rubber stator ,which is made of
various elastic material,such as NBR rubber,silicon rubber. | |||
3) . It could transfer high viscosity fluid and material with hard
suspended solid/fiber as well,like lime slurry,cement mortar,thick
ferment slurry and other pasty liquid. | |||
4). Pump could be equipped with ordinary motor,gear box
motor,electric magnetic speed adjustable motor,CVT motor,frequency
inverter motor according to customers's requirements. | |||
5) . Widely used in construction field,chemical
industry,foodstuff,petroleum industry,environmental
protection,sewage treatment. |
Model | Caliber | Speed(rmp) | Flow( m³/h ) | Power(kw) |
ACE-G10-1 | 20 | 1400 | 0.5 | 0.37 |
ACE-G15-1 | 25 | 960 | 1 | 0.55 |
ACE-G20-1 | 32 | 960 | 1.5 | 0.75 |
ACE-G25-1 | 32 | 960 | 2 | 1.1 |
ACE-G30-1 | 40 | 960 | 3 | 1.5 |
ACE-G35-1 | 50 | 960 | 5 | 2.2 |
ACE-G40-1 | 50 | 960 | 7 | 3 |
ACE-G40-2 | 50 | 720 | 5.5 | 2.2 |
ACE-G45-1 | 50 | 960 | 9 | 4 |
ACE-G45-2 | 50 | 720 | 7 | 3 |
ACE-G50-1 | 65 | 960 | 13 | 5.5 |
ACE-G50-2 | 65 | 720 | 10 | 4 |
ACE-G55-1 | 65 | 960 | 18 | 7.5 |
ACE-G55-2 | 65 | 720 | 13 | 5.5 |
ACE-G65-1 | 80 | 720 | 30 | 11 |
ACE-G86-1 | 100 | 720 | 60 | 15 |
Features | |||
1). Capability to handle high solid contents with fibres &
solid particles up to 40mm size. | |||
2). Capability to have high suction lift (up to 8.5 mwc). | |||
3). Capability of variation in flow rate by just changing the pump
speed. | |||
4). Good self priming properties even with air or gas inclusion. | |||
5). Capability to develop high-pressure heads. | |||
6). Capability to deliver very accurate dosages given appropriate
drive controls. | |||
7). Lower fluid velocity and so lower wear rate. | |||
8). Simple construction and high reliability of operation. | |||
9). Easy and quite maintenance, which does not require any special
tools. | |||
10). Steady and smooth flow enhances negligible pulsation. | |||
11). No foaming and No foot value is required. | |||
12). High efficiency for viscous fluids resulting in higher saving
of power | |||
13).Pressure head is independent of speed while capacity is
dependent on speed. |
Product Feature | |||
1).Between Rotor and stator keep a certain gap,no friction
coefficient and long service life. | |||
2).High efficiency and energy saving,conveying smooth,low failure
rate, reliable sealing and low noise. | |||
3).Simple assembly and disassembly,maintenance,cheaning is
convenient,less easyworn parts. | |||
4).To keep the continuity of operation reliability and no leak
time. | |||
5).After to use of special material,may conveying the sludge and
sewage containing solid grain of the granular. | |||
6).May conveying the medium viscosity for less than or equal to one
million cp,and contain solid content is sixty percent of the
slurry. | |||
7).May conveying the vapor,fluid and solid three-phase mixed
material. | |||
8).This pump to use special stainless steel,can conveying strong
corrosive fluid. | |||
9).Configuration frequency transfurer,can adjust flow,and can make
the general metering pump use. | |||
10).According to user needs,in the pump shell increase thermal
insulation and health-grade safety valve. | |||
11).Have a strong self suction. | |||
12).Conveying medium ingredients won’t change. | |||
13).According to the user requirements of connect,can choose
flange,threaded type,fast interface type and mobile. |
1.Main tanks, vessels and machines will be packaged with painted steel frames.
2.All spare parts, accessories and fittings will be packaged with
painted steel box.
3.All items wrapped with soft package for protection.
4.Standard shipping containers will be used for general purpose.
5.All equipments will be loaded into containers according to exact
container layout drawings.
6.After loaded into containers, all equipments will be well fixed
to the containers.
