Active Member
|
[China]
Address: No. 27-28, Building 58, Hedong Road, Economic Development Zone, Wenzhou, Zhejiang, China
Contact name:Sophia Hsu
Wenzhou Ace Machienry Co., LTD |
|
Manufacturer PP Water Filter Parts High Efficiency PP Pleated 0.2 Micron Filter
Ø RO pre-filtration
Ø Filter of wine mineral water and drink water
Ø Swimming pool circulating water filtration
Ø Acid-base liquid in chemical processing
Ø Processing of sterile water and ultrapure water
Ø Industrial water and plating liquid
Ø Solvents and potion pre-filtration
Ø Oil and gas
Ø Toiletries
Ø Photographic development and potion filteration.
Filter Media | Polypropylene | ||
Support/Drainage | Polypropylene | ||
Support/Drainage | Polypropylene | ||
Maximum operating temperature | 80℃ | ||
Maximum operating pressure | 4bar@25℃ | ||
Maximum operating pressure(reverse direction) | 2.6bar@25℃ | ||
Mosit-heat sterilization | 121℃/30min | ||
Flowing hot water sterilization | 85℃/30min | ||
Micron(µm ) | 0.1μm, 0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm | ||
Filtration area | 0.5-0.6m² | ||
Outside diameter | 68.5mm | ||
Keyword | Membrane Water Filter | ||
1.Main tanks, vessels and machines will be packaged with painted steel frames.
2.All spare parts, accessories and fittings will be packaged with
painted steel box.
3.All items wrapped with soft package for protection.
4.Standard shipping containers will be used for general purpose.
5.All equipments will be loaded into containers according to exact
container layout drawings.
6.After loaded into containers, all equipments will be well fixed
to the containers.
Materials of Construction | ||
Filter Media | PP | |
Support and Drainage | PP | |
Core, Cage | PP | |
End Caps | PP | |
O-rings/Gasket | Silicone/EPDM/Viton | |
Sealing Technology | Thermal Bonding, No Adhesives | |
Dimensions | ||
Diameter | Φ68 | |
Length | 5 inch, 10 inch, 20 inch, 30 inch, 40 inch | |
Filtration Area, ft 2 | ||
≥ 4.4 per 10-inch element | ||
Pore Size, μm | ||
0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0, 10, 20 | ||
Maximum Differential Pressure | ||
Forward: 4.2 bar @ 23 degrees Celsius ; 1.5 bar @ 85 degrees Celsius | ||
Flow Rate & Pressure Drop , per 10-inch cartridge | ||
0.22 μm | ≥ 25 L/min at 210 mbar | |
0.45 μm | ≥ 27 L/min at 210 mbar | |
Particle Removal Efficiency (%) | ||
≥ 80 | ||
Sanitization | ||
May be hot water sanitized for 30 cycles using purified water at 85 degrees Celsius for 30 min | ||
Good Manufacturing Practices | ||
Manufactured in an ANOW facility which adheres to Good Manufacturing Practices. | ||
