Active Member
|
Address: 701 of NO.69, xilinxili, siming, xiamen, China
Phone: 86-013-2436807
Contact name:
GANDO INTERNATIONAL (HONGKONG) LIMITED |
|
|
380V Sensorless AC Motor Vector Control Drive for CNC Machine
A CNC lathe is a machine tool designed to remove material from a rotating work piece, using a cutting tool. Some lathes can form hollow parts by a process called metal spinning. These parts have circular cross-sections. Metal and other materials can be turned on a lathe, including wood and plastics. CNC controlled lathes use a computer to control the process of making each part with repeated accuracy and precision.
Application Challenges
· Precise speed regulation and torque over wide speed range
· Interlock drive with operation of CNC.
· Quick acceleration even under high torque conditions
Features of 303 series CNC application
Features | Benefits |
Wide speed ratio | W/O PG vector: 1:100, W/T PG vector: 1:1000 |
Terminal-Peripheral equipment control | Control start/stop with the contact or button to simply realize the automation control of the entire equipment system. |
Vector control 0 | Real time estimates speed information of the motor only, without feedback control, real-time closed-loop control of the current all the way, 0.50 Hz outputs rated torque of up to 150%, track load change and limit output current automatically to make it not exceed the permitted maximum current value.No overcurrent error even if load mutation, rapid acceleration and deceleration to realize high performance and high reliability configuration of the universal Inverter. |
Vector control 1 | Not only real time estimates speed information of the motor, but also conduct feedback control, real-time closed-loop control of both the speed and current all the way, which can realize not only speed control but also torque control, and can translate universal AC induction motor into AC speed regulation motor and AC torque motor by adopting such kind of drive mode. This is a real vector control Inverter without external speed sensor. |
DC Braking | Braking frequency: 0.1~60Hz Braking time: 0~30 seconds Braking current: 0~100% rated current |
Power range of V5 VFD
Voltage: 3 phase 380VAC(304VAC – 460VAC)
Power: 0.75kw/1HP – 400kw/535HP
Specification of 303 VFD
Item | Specification |
Input frequency | 50/60Hz |
Output frequency | 0-600Hz |
Overload current | 150% rated current 1min., 180% 2 sec. |
Control mode | sensor-less vector control(SVC), V/F control |
Starting torque | 150% 1Hz (SVC 150% 0.5Hz) |
Control precision | ±0.5% |
Given Frequency Resolution | Digital given: 0.01Hz, analog given: 0.05Hz |
Running Mode | Keyboard, control terminal (two-line control, three-line control), RS485 |
Output Voltage self-adjustment | When AVR function is enabled, the input voltage changes, while the output voltage almost remains unchanged |
Frequency setting signal | 0~+10V; 0~20mA; |
Protection function | Short circuit, overcurrent, overload, overvoltage, undervoltage, default phase, overheating, and external fault, etc. |
Enclosure | IP20 |
Cooling mode | forced air cooling |
Vibration | Less than 0.5g |
Ambient temperature / Humidity | -10 Degrees~+40 Degrees / 20~90%Rh (no condensation) |
Tips:
A variable-frequency drive (VFD) is a system for controlling the rotational speed of an alternating current (AC) electric motor by controlling the frequency of the electrical power supplied to the motor. A variable frequency drive is a specific type of adjustable-speed drive. Variable-frequency drives are also known as adjustable-frequency drives (AFD), variable-speed drives (VSD), AC drives, microdrives or inverter drives. Since the voltage is varied along with frequency, these are sometimes also called VVVF (variable voltage variable frequency) drives.
