|
[China]
Trade Verify
Address: No.6 Chuanxin Road,XiaCheGang,Ge Keng,Hengli Town,Dongguan City, 523469 P.R.China
Contact name:Lily Li
Dongguan Analog Power Electronic Co., Ltd |
|
Verified Suppliers
|
|
|
Full Enclosed Plastic Case PoE Switch Power Adaptor 230v 24v 2a Power Supply Adaptor
PoE Power Supply combines power and data and delivers them to a powered device over one Ethernetcable. Designed for power-hungry devices, provides up to 60 watts, twice as much as conventional PoE+ injectors. It features DIP switch configurator and LED indicator for PoE management, and also supports 24VDC /48 VDC power inputs for power redundancy and operational flexibility. wide temperature range design makes it perfect for operating in critical industrial environments.
| Model: | GQ48-240020-AC |
| Power: | 48 W max |
| Input: | 100-240VAC 50/60Hz |
| Output Voltage: | 12-55V |
| Output Current: | 0.1-4A |
| Input current: | 0.8A max. |
| Inrush Current: | 50 Amps max. at 230VAC/50Hz,full load |
| Leakage Current: | 0.25mA Max. at 264VAC input |
| Power Consumption: | 48W max. |
| Data Rate: | 10/100/1000Mbps |
| LED Indicator: | AC power, POE active |
| Output Connectors: | RJ45(data+power) |
| Interface | 1 " data" in RJ45 Ethernet port 1 " data+power" output RJ45 Ethernet port 1 AC input power socket for external |
| Protections: | Short Circuit /Over Current /Over Voltage |
| Short Circuit Protection (SCP): | Protection to Zero Voltage |
| Over Voltage Protection (OVP): | ≤Vout*150% |
| Over Current Protection (OCP): | 110%-180% |
| Operating Ambient Temperature.: | -20°C-45°C |
| Operating Humidity: | Maximum 90%, Non-condensing |
| Storage Temperature | -20℃ ~+70°C |
| Storage Humidity | Maximum 90%, Non-condensing |
| Compliance | IEEE802.3at/af (POE), CE, RoHS, Reach |
| Applications: | IP Phones,Wireless Networks Access Points, IP print servers, Blue tooth access points, IP Cameras, UPS, Switch, Smart door systerm and more. |
| MTBF: | 100,000 hours minimum at full load at 25℃ ambient |
| Warranty | 3- 5years alternative |
| Dimension: | 120*60*36mm |
| Weight: | 260g |
| Packaging: | 20PCS/CTN,40*30*20cm |
Details:
1. Supports all IEEE802.3at- and IEEE 802.3af- compliant POE devices( Wireless LAN access points and bridges, VOIP( voice over Internet Protocol) telephones, IP surveillance cameras)
2. Automatic Detection and Protection of non-standard Ethernet terminals
3. Compact design fits easily in WLAN Access point and IP cameras installations
Product Features
The 48V POE power supply has multi-layer protection,just name a few of them. Input over-voltage protection, output over-voltage protection, over-current short-circuit protection for each output, and has functions such as conducted interference (CE) and radiated interference (RE).
Comply with EN55022/CLASSB standard, WER OUT (13.26) data is directly transferred out, 45.78 pin provides 48V power supply (45+, 78-)
PoE Power Adapters is a kind of adapter designed for Ethernet application. It delivers power to end device through four idle line of Ethernet cable.To prevent the tiny signal line get hurt, the rated current allowed is 350mA,the trip point of over current proteetion is around 450mA. At no load condition, this series meets green power regulation.
Advantages of POE Power
1. It is easy to install and manage. Customers themselves can
safely mix legacy and PoE devices on the network, coexisting with
existing Ethernet cables
2. It is easy to manage the network equipment.
3. It is safe. Because the PoE power supply end device will only
supply power to the device that needs power supply. The Ethernet
cable will only have voltage present when the device that needs
power is connected, thus eliminating the risk of leakage on the
line.
4. It saves costs. Because it only needs to install one cable
instead of two. In many cases, installation is required where it is
difficult to deploy AC power. With the increase of
Ethernet-connected devices, it will greatly reduce the cost of
deployment and simplify its manageability if there is no need to
provide local power to the device.
5. The addition of a network lightning protection module to POE
products can ensure the safety of front-end equipment in
thunderstorms. The network cable does not exceed 100 meters, and it
is not easy to form induced potential to damage the electronic
components of the camera.
6. When the POE-powered network video surveillance system adopts
centralized power supply, because the power receiving module has
the function of supporting the power identification circuit, it
will not cause waste of electric energy and effectively save
energy.
Protection:
Applications:
