Rin Rui 3D Printer Filament 1kg/2.2lb 1.75mm PLA 45 Colors For 3d
PLA (polylactides) are synthetic polymers belonging to the
polyesters. They are used to make plastic that is obtained from
renewable sources (such as cornstarch). This makes PLA a
biocompatible raw material. 3D printing Filament is often not a
pure PLA, but a so-called PLA blend, whose basic structure is
enriched with additives to obtain certain desired properties. All
Elegoo PLA filaments are sealed with desiccant for storage and
1.raw material: Made from 100% renewable and natural raw materials.
2.High impact resistance and good flexural strength. Great layer
and bed adhesion.
3.Tangle-free filament winding: You no longer worry about the PLA
being entangled when you go away. Let it print all night.
4.No warping (low shrinkage, 0.3%). +/- 0.02mm diameter tolerance.
5.Recommended Printing Temperature: 180 – 220C (ideal 195C). Heated
Bed: Not Required (but can be used) , Recommended Printing Speed:
40 – 120 mm/s.
6.Compatible for most common 3D printers such as ROBO 3D, Cubify,
Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge,
Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker
and any other 3D printers
|Color||more than 50|
|Best printing temperature||200℃|
|Heating bed temperature||50℃|
|Heat Distortion Temperature||80℃|
1. Made of good quality PLA material.
2. Compatible with most of the 3D printers.
3. It is stronger and more rigid than ABS, and in general the
printed objects will have a more glossy look and feel compared to
4. PLA is a common type of biodegradable filament which is derived
from renewable resources, such as corn starch, tapioca roots, chips
or starch, or sugarcane.
5.PLA allows higher print speed, more accurate placement of
material with proper cooling and thinner build heights, because of
it has less resistance from the plastic coming out the nozzle.
6. It smells like cotton candy scent when it is used.
7. Various colors for selection.
8. Dimensional accuracy within plus or minus 0.02mm.