|
[China]
Trade Verify
Address: Waterfront industrial zone,Hengli Town,Dongguan City,Guangdong
Contact name:He
Dongguan Dezhijian Plastic Electronic Ltd |
|
Verified Suppliers
|
|
|
Filament 3d printer plastic pla filament 1.75 abs for 3d printing
PLA 3D printer filaments information:
PLA (Polylactic Acid) 3d printer filament is 100% new pure Polylactic Acid material. It is one of the most popular materials for 3D printing. Our PLA filament has a relatively low melting temperature, low warp properties and is biodegradable.
1.PLA filament has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA filament has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses.
2. PLA filamentis considered stronger than ABS but is more susceptible to cracking when flexing, impacted or subject to torsional loads so the mechanical needs of the print project have to be evaluated.
3. PLA filament has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.
Parameter
| Filament Diameter | 1.75/3.00mm |
| Tolerance | ±0.03mm |
| Print Temp | 190—210℃ |
| Bed Temp | Optional or 40—60℃ |
| Bed Setting | Masking tap or temperature resistant heat tape |
| Applicable Models | FDM—3D Printer |
Spool Size:
Quality control:
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest certificate.
2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
