|
[China]
Trade Verify
Address: Unit 1602, Top Plaza, No.2 Lujiang Road, Siming District, Xiamen Fujian China
Contact name:Candy Wang
Huge Technology Automation Co.,Ltd |
|
Verified Suppliers
|
|
|
MATERIAL NUMBER:
X20AI4632
The module is equipped with 4 inputs with 16-bit digital converter resolution. It is possible to select between the current and voltage signal using different terminals.
| B&R ID code | 0x1BA1 |
| Status indicators | I/O function per channel, operating state, module status |
| Diagnostics | |
| Module run/error | Yes, using LED status indicator and software |
| Inputs | Yes, using LED status indicator and software |
| Channel type | Yes, using software |
| Power consumption | |
| Bus | 0.01 W |
| Internal I/O | 1.5 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| EAC | Yes |
| KC | Yes |
| Input | ±10 V or 0 to 20 mA, via different terminal connections |
| Input type | Differential input |
| Digital converter resolution | |
| Voltage | ±15-bit |
| Current | 15-bit |
| Conversion time | 50 μs for all inputs |
| Output format | INT |
| Output format | |
| Voltage | INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV |
| Current | INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 610.352 nA |
| Input impedance in signal range | |
| Voltage | 20 MΩ |
| Current | - |
| Load | |
| Voltage | - |
| Current | <400 Ω |
| Input protection | Protection against wiring with supply voltage |
| Permissible input signal | |
| Voltage | Max. ±30 V |
| Current | Max. ±50 mA |
| Output of digital value during overload | |
| Undershoot | |
| Voltage | 0x8001 |
| Current | 0x0000 |
| Overshoot | |
| Voltage | 0x7FFF |
| Current | 0x7FFF |
| Conversion procedure | SAR |
| Input filter | Hardware - Third-order low-pass filter / cutoff frequency 10 kHz |
| Max. error | |
| Voltage | |
| Gain | 0.08% |
| Offset | 0.01% |
| Current | |
| Gain | 0.08% |
| Offset | 0.02% |
| Max. gain drift | |
| Voltage | 0.01%/°C |
| Current | 0.01%/°C |
| Max. offset drift | |
| Voltage | 0.001%/°C |
| Current | 0.002%/°C |
| Common-mode rejection | |
| DC | 70 dB |
| 50 Hz | 70 dB |
| Common-mode range | ±12 V |
| Crosstalk between channels | <-70 dB |
| Nonlinearity | |
| Voltage | <0.01% |
| Current | <0.015% |
| Insulation voltage between channel and bus | 500 Veff |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Derating". |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2mm |
